Dulux Trade Vinyl Matt Interior Wall Paint - Multicolor

This paint is designed for interior walls and ceilings. It can be applied over most previously painted surfaces in good condition, or over a suitable primer on bare plaster, plasterboard, or new surfaces.

The number of coats required depends on the previous color and condition of the surface. This paint offers excellent coverage and often requires only one or two coats, but for significant color changes or dark colors, more may be needed.

No, this product is mixed to order and therefore cannot be returned or refunded. Please ensure you have selected the correct color and quantity before purchasing.

While it's a vinyl matt paint, it's primarily designed for general interior walls and ceilings. For high-moisture areas like bathrooms, a specific bathroom paint with higher moisture and mildew resistance is generally recommended.

The paint dries quickly. It is usually touch dry within 1-2 hours, and recoatable after approximately 4 hours, depending on conditions like temperature and humidity.

This paint has a Low VOC (Volatile Organic Compounds) content, making it a more environmentally conscious choice for interior decorating.

Clean all brushes, rollers, and equipment immediately after use with warm water. Wash thoroughly to remove all paint residue.

Stir the paint thoroughly. If still too thick, add a very small amount of clean water (typically less than 5%) and mix well. Avoid over-thinning.

Ensure the surface was properly prepared and is uniform. Apply paint evenly, maintaining a wet edge to avoid lap marks. Check if the paint was stirred sufficiently and applied consistently.

Ensure the surface was clean, dry, and properly primed if necessary. Remove any loose or flaking paint before application. A primer is often essential for bare or problematic surfaces.

Apply paint in consistent strokes, working from top to bottom. Maintain a wet edge to blend new paint into the previous stroke. Use the correct type of brush or roller for emulsion paints.