Best current price£124.02from B&Q
Shopping.co.uk recommended and popular offers
B&Q£124.02Visit shop B&Q - 4 Port Underfloor Heating Manifold With Pipe Connections Copper 15mm X 3/4 Ball Valves With Thermometers Psw Tradesuppliers Ltd
Visit shop14 offers from £124.02 - £125.00
View price history by clicking the chart icon.
This Wärmer System 4 Port Underfloor Heating Manifold is designed for homeowners and contractors seeking efficient and reliable water distribution for multi-zone underfloor heating systems. Its key benefit is simplified installation with pre-mounted brackets and included components, ensuring optimal heat distribution. A potential consideration is the need for standard plumbing tools for setup. The system provides four distinct heating zones, features integrated thermometers and ball valves for control, and is built with durable materials for long-term performance.
| Model Part Number | E102W+(A119*6)+(E128+E129) |
|---|---|
| Brand | Wärmer System |
This specific variant is designed for 20mm pipes with 3/4 inch connections. Compatibility with other pipe sizes depends on the specific euro cone fittings used.
Yes, each port is a separate zone. You can control the flow and temperature to each zone individually using the integrated ball valves and thermometers.
The automatic air vent continuously removes air from the heating system, which is crucial for maintaining efficient performance and preventing noises like knocking.
The manifold comes with a pre-mounted bracket for wall mounting. Connect the main water lines and the underfloor heating pipes to the appropriate ports using standard plumbing tools and euro cone fittings.
It is suitable for hydronic (water-based) underfloor heating systems. Ensure your system's pipework uses standard 3/4 inch euro cone fittings for connection.
Warranty information is typically provided by the retailer or manufacturer. Please refer to your purchase documentation for specific warranty details.
Yes, the manifold can be assembled for either left or right-hand supply configurations to accommodate different installation layouts.
Check if the ball valve for that zone is fully open. Ensure the corresponding underfloor heating loop is not blocked and the supply pipe is delivering hot water.
Check for leaks in the manifold connections or the underfloor heating pipes. Refill the system as per your boiler manufacturer's instructions if pressure is too low.
Manually vent air using the automatic air vent end unit. Repeat if necessary after the system has run for some time.
Ensure all pipe connections, especially the euro cone fittings, are securely tightened. Check for damaged O-rings or seals.
Setup: The manifold comes pre-mounted with an installation bracket. Secure the bracket to a suitable wall surface using appropriate fasteners. Connect the main water supply to the inlet and outlet ports. Attach the underfloor heating pipes to the 3/4 inch euro cone fittings on each of the four loops. Ensure all connections are tightened securely using standard plumbing tools. Install the automatic air vent and pressure gauge end units as per the manual. Configure the supply direction (left or right) if necessary during installation.
Compatibility: The 3/4 inch thread is designed for compatibility with standard euro cone fittings, commonly used for connecting to underfloor heating loops. Ensure your underfloor heating pipes have compatible fittings.
Care: Periodically check the pressure gauge to ensure it is within the recommended range for your heating system. The automatic air vent should be monitored; if you notice persistent air in the system, consult the manual. Cleaning the exterior can be done with a damp cloth. Avoid using abrasive cleaners. Bleeding the system via the air vent or drain-off valve may be necessary annually or if air is detected.
