Toupret Adhesive Scrim Tape - 90M x 48M

While the tape is designed for optimal performance with Toupret Joint Filler, it can be used with other suitable plasterboard jointing compounds. However, using Toupret fillers is recommended for guaranteed compatibility and best results.

The tape provides reliable adhesion in temperatures between 5°C and 35°C.

The Toupret Adhesive Scrim Tape measures 48mm in width and comes in a 90-meter length roll.

No, this is a self-adhesive mesh tape and does not require wetting. It adheres directly to the plasterboard surface.

Drying times for filler vary depending on the product used, thickness of application, and ambient conditions. Refer to the specific filler's instructions for drying times before overcoating.

This tape is primarily designed for new plasterboard jointing. For crack repairs, specific Toupret repair products might be more suitable, though the scrim tape can reinforce larger repairs.

Yes, the high-strength mesh provides robust reinforcement for standard plasterboard joints, ensuring a durable and crack-resistant finish.

Ensure the plasterboard surface is clean, dry, and free from dust, grease, or loose particles. Verify the application temperature is within the recommended range (5°C - 35°C).

Apply the tape smoothly, pressing from the center outwards. If significant bubbles are present, carefully lift and reapply, ensuring firm pressure. Small imperfections can often be smoothed out by the filler.

Ensure the tape is fully embedded in the filler and the filler coat is sufficiently thick to bridge the joint. Check that the tape was applied directly over a prepared, stable joint.

Allow the initial layer of filler over the tape to set slightly before applying subsequent feathered coats. Use appropriate plastering tools for smooth transitions.