Scan Hazard Diamond Sign - 100 X 100mm

This message indicates that the container holds a gas which is under pressure and is not flammable. It is crucial for safe handling, storage, and emergency response.

The sign adheres best to clean, flat, and smooth surfaces such as metal, glass, and smooth plastics. It is not recommended for rough, dirty, or porous surfaces.

Under normal indoor conditions and on a properly prepared surface, the self-adhesive vinyl is designed for long-term use. Performance can be affected by extreme temperatures, humidity, or exposure to chemicals.

While it can be removed, reapplying it may compromise the adhesive's effectiveness. It's best to apply it once to the desired location.

The sign measures 100 x 100mm.

Hazard diamond signs are part of standardized systems for communicating risks, aiding compliance with workplace safety regulations regarding hazardous materials.

Ensure the application surface is thoroughly cleaned, dried, and is indeed flat and smooth. Reapply pressure to the sign. If the surface is slightly irregular, consider a surface primer or sealant designed for vinyl adhesion.

This may indicate exposure to harsh chemicals or extreme environmental conditions. Ensure cleaning methods are appropriate (damp cloth, no solvents). If degradation is severe, the sign may need replacement.

Attempt to gently lift the edge of the sign and smooth it down again, working from the center outwards. For small, persistent bubbles, a pinprick can sometimes release trapped air, but do so cautiously.