Shopping.co.uk

Laser 7587 Deep Impact Socket - 44mm - 3/4"" Drive

Laser 7587 Deep Impact Socket - 44mm - 3/4"" Drive

Laser 7587 Deep Impact Socket - 44mm - 3/4"" Drive. Applications include: Citroën Dispatch, Jumpy,...

Best current price£34.50from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

8 offers from £34.50 - £34.70

View price history by clicking the chart icon.

eBayLaser 7587 3/4"" Drive 44mm Deep Impact Socket
Free delivery in 1–3 days
£34.50
Visit shop

Product Information

Full details

This guide is for mechanics and DIY enthusiasts who need a reliable deep impact socket for automotive work, specifically for front ball joints on certain vehicle models. The Laser 7587 provides a robust solution for loosening and tightening stubborn fasteners. A key consideration is ensuring compatibility with your existing tools, as this socket requires either a 3/4" drive or an adapter for 1/2" drive tools.

All features

Model Part Number7587
BrandLaser

Extended Product Information

FAQs

What vehicles is this socket compatible with?

This socket is designed for front ball joints on Citroën Dispatch, Jumpy, Peugeot Expert, Traveller, and Toyota Proace Van models (from 2016).

What size drive does the socket require?

The socket requires a 3/4" drive. It can also be used with a 1/2" drive tool when used with the Laser Part No. 3258 (1/2" to 3/4" Adaptor).

What is the socket's length and outer dimension?

The socket's length is 90mm and the outer dimension is 63.8mm.

Can I use this socket for other applications?

While designed for front ball joints on the specified vehicles, its use is limited to the socket's dimensions and the fastener size.

How do I maintain the socket?

Clean the socket after each use to remove debris. Store it in a dry place to prevent rust.

What if the nut is too tight?

Apply penetrating oil, increase torque setting, or use a breaker bar.

Where can I purchase the adapter?

The adapter is Laser Part No. 3258 and can be purchased from automotive tool suppliers.

Troubleshooting

Socket won't fit the nut.

Double-check that the socket size (44mm) is correct for the nut. Verify the nut isn't damaged or corroded.

Socket slips off the nut.

Ensure the socket is fully engaged on the nut. Check the impact wrench's torque setting and increase if necessary.

Difficulty loosening a stuck nut.

Apply penetrating oil to the nut and let it soak. Use a higher torque setting on your impact wrench. Consider using a longer breaker bar if the impact wrench isn't sufficient.

Pros and Cons

Pros

  • Durable construction ensures longevity.
  • Specifically designed for a range of vehicles, increasing usability.
  • Deep socket design allows access to difficult to reach fasteners.
  • Compatible with a variety of tools, increasing versatility.

Cons

  • Requires either a 3/4" drive tool or an adapter.
  • Limited to specific vehicle applications.
  • May not fit all vehicles with similar ball joints - check dimensions.
  • Requires the correct tools for proper use.

Setup, Compatibility & Care

  1. Tool Compatibility: Ensure you have either a 3/4" drive impact wrench or a 1/2" drive impact wrench and the Laser Part No. 3258 (1/2" to 3/4" Adaptor).
  2. Socket Installation: Attach the socket securely to the drive tool.
  3. Vehicle Preparation: Safely raise and support the vehicle, following proper safety procedures.
  4. Application: Position the socket on the nut or bolt of the front ball joint.
  5. Use: Apply appropriate torque to loosen or tighten the fastener.
  6. Care: After each use, clean the socket to remove debris. Store it in a dry place to prevent rust.

*Important Note*: Always consult the vehicle's service manual for specific torque specifications.

Price History

DatePrice
Visit shop