Shopping.co.uk

Tamiya 54646 Carbon Pattern Sticker - TT01/TT02/TL01/TA02/TA06/TB03/TB04/XV-01

Tamiya 54646 Carbon Pattern Sticker - TT01/TT02/TL01/TA02/TA06/TB03/TB04/XV-01

This is a Tamiya 54646 Carbon Pattern Sticker set. It is compatible with a variety of Tamiya RC ca...

Best current price£5.51from eBay

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £5.51

View price history by clicking the chart icon.

eBayTamiya 300054646 - Carbon Decal Sheet DIN A5 - New
£14.99 delivery
£5.51
Visit shop

Product Information

Full details

This guide is for RC car enthusiasts using the Tamiya 54646 Carbon Pattern Sticker set. It helps users apply the stickers effectively, enhancing the look of their models. Note that successful application requires patience and precision.

All features

Model Part Number54646
BrandTamiya

Extended Product Information

FAQs

What models are these stickers compatible with?

These stickers are primarily designed for Tamiya TT01, TT02, TL01, TA02, TA06, TB03, TB04, and XV-01 models, but may fit other models as well.

How do I remove air bubbles?

Use a smoothing tool or credit card to gently push the bubbles towards the edges of the sticker during application.

Can I use these stickers on a painted surface?

Yes, ensure the painted surface is fully cured and clean before applying the stickers.

What should I clean the car body with before applying the stickers?

Use a mild soap and water solution to clean the car body. Make sure it is completely dry before application.

What tools are helpful during application?

A hobby knife or sharp scissors for trimming, a smoothing tool or credit card to remove bubbles, and possibly a heat gun or hairdryer for curved surfaces.

How do I care for the stickers after application?

Gently wipe the stickers with a soft cloth to remove dust and dirt. Avoid harsh chemicals and prolonged exposure to direct sunlight.

Troubleshooting

Sticker bubbles after application

Lift the sticker gently from the edge and reapply, smoothing out any bubbles with a smoothing tool or credit card.

Sticker not adhering properly

Ensure the surface is clean and dry. Use a heat gun or hairdryer on a low setting to help the adhesive activate and conform to the surface.

Pros and Cons

Pros

  • Improves the visual appeal of your RC car.
  • Compatible with a wide range of Tamiya models.
  • Easy to apply with proper preparation.
  • Adds a layer of protection to the car body.

Cons

  • Requires careful application to avoid bubbles or misalignments.
  • May require trimming to fit some models perfectly.
  • Can be time-consuming to apply to larger surfaces.
  • Adhesion may vary depending on the surface.

Setup, Compatibility & Care

  1. Preparation: Clean the RC car body surface thoroughly with a mild soap and water solution. Ensure the surface is completely dry before application.
  2. Application: Carefully peel the sticker from the backing sheet. Position the sticker on the car body and press down firmly, starting from the center and working outwards.
  3. Tools: A hobby knife or sharp scissors may be needed for trimming the stickers to fit the car body precisely. A smoothing tool or credit card can help to remove any air bubbles.
  4. Compatibility: This sticker set is designed to fit a wide range of Tamiya models including TT01, TT02, TL01, TA02, TA06, TB03, TB04, and XV-01. It may also be compatible with other models.
  5. Care: Avoid harsh chemicals or abrasive cleaners. Gently wipe the stickers with a soft cloth to remove dust and dirt. Avoid prolonged exposure to direct sunlight to prevent fading.

Price History

DatePrice
Visit shop