Liberon Palette Wood Dye - Light Oak - 500ml
Best current price£14.76from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£14.76Visit shop B&Q - 014370 Palette Wood Dye Light Oak 500Ml Libwdplo500
Visit shopB&Q£14.76Visit shop All Offers
3 offers from £14.76 - £19.49
View price history by clicking the chart icon.
B&QB&Q - 014370 Palette Wood Dye Light Oak 500Ml Libwdplo500
Free delivery in 1–3 days
£14.76
Visit shop
OnBuy.comLiberon Wdplo500 500Ml Palette Wood Dye - Light Oak 5022640003321
Free delivery in 1–3 days
£19.49
Visit shop
Liberon Wdplo500 500Ml Palette Wood Dye - Light OakFree delivery in 1–3 days£19.49Visit shop →
Product Information
Full details
The Liberon Palette Wood Dye in Light Oak is designed for DIY enthusiasts and professionals seeking to enhance interior woodwork. Its key benefit is providing a water-based dye that colors wood while preserving the natural grain, offering a subtle, authentic finish. A potential caveat is that it is strictly for interior use.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 014370 |
| Brand | Liberon |
Extended Product Information
FAQs
Can this wood dye be used on exterior projects?
No, the Liberon Palette Wood Dye is specifically formulated for interior woodwork only. It does not offer the necessary weather resistance for external applications.
Do I need to seal the wood after using the dye?
Yes, it is essential to seal the wood with a suitable topcoat, such as varnish, lacquer, or oil, after the dye has dried. This protects the color and the wood, providing durability and resistance.
How many coats of dye should I apply?
The number of coats depends on the desired color intensity and the type of wood. Start with one thin, even coat, and apply additional coats if a darker shade is required, allowing each coat to dry fully in between.
Can I mix different colors of Liberon Palette Wood Dye?
While not explicitly recommended by the manufacturer for all shades, it is generally possible to mix wood dyes to create custom colors. Always test the mixture on a scrap piece of wood first to ensure the desired outcome.
How should I prepare the wood before applying the dye?
The wood must be clean, dry, and smooth. Sand the surface with fine-grit sandpaper, remove all dust, and ensure there are no old finishes, waxes, or grease present.
What is the coverage rate of the 500ml can?
Coverage can vary depending on the absorbency of the wood and the application method. A general guideline is that 500ml can cover approximately 5-10 square meters per coat, but always check the product packaging for the most accurate information.
Troubleshooting
Uneven or blotchy color application
Ensure the wood surface is uniformly prepared and sanded. Apply the dye in thin, even coats and wipe off excess promptly. Avoid over-brushing or working the dye too much into the wood. For difficult woods, consider using a pre-dye conditioner.
Dye not penetrating or coloring the wood
Check that the wood surface is clean and free from any sealants, waxes, or previous finishes. Lightly re-sand the surface to open the wood pores if necessary. Ensure the dye has been stirred thoroughly.
Color is too light after application
Allow the first coat to dry completely, then apply additional thin coats until the desired shade is achieved. Ensure the dye is applied evenly with each coat.
Wood appears dull after dyeing
The dye itself does not provide protection or sheen. A clear topcoat (varnish, lacquer) needs to be applied after the dye has dried completely to achieve the desired finish and durability.
Pros and Cons
Pros
- Enhances natural wood grain.
- Water-based for easy cleanup.
- Suitable for various interior woodwork.
- Provides a classic Light Oak finish.
- User-friendly for DIY projects.
Cons
- Strictly for interior applications.
- Requires a clear topcoat for durability.
- May require multiple coats for deeper color.
- Surface preparation is crucial for best results.
Setup, Compatibility & Care
Preparation:
- Surface Cleaning: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes.
- Sanding: Lightly sand the wood with fine-grit sandpaper (e.g., 240 grit) to create a smooth surface and open the pores for better dye absorption. Remove all sanding dust.
- Testing: Always test the dye on an inconspicuous area of the wood or a scrap piece to check the color and desired effect before proceeding with the main project.
Application:
- Stir the dye thoroughly before use.
- Apply the dye evenly using a brush, cloth, or foam roller, working in the direction of the wood grain.
- Wipe off any excess dye with a clean, lint-free cloth.
- Allow the dye to dry completely (refer to product instructions for drying times, typically a few hours).
- Apply additional coats if a darker shade is desired, allowing each coat to dry thoroughly.
Compatibility:
- This dye is compatible with most interior woods.
- It *must* be sealed with a compatible topcoat (varnish, lacquer, oil) to protect the color and the wood, and to provide durability.
Care:
- Clean application tools immediately after use with water.
- Store the dye in its original container in a cool, dry place, away from direct sunlight and frost.
- Ensure the lid is tightly closed to prevent drying out.