Best current price£18.17from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£18.17Visit shop Faithfull Fencing Pin 10 X 1200Mm
Visit shop
B&Q£18.88Visit shop B&Q - Fencing Pin 10 X 1200mm Multi Colour (One Size)
Visit shop2 offers from £18.17 - £18.88
View price history by clicking the chart icon.
The Faithfull Fencing Pin is an essential tool for contractors, site managers, and event organizers who need a reliable method for marking restricted zones or temporary perimeters. Its primary benefit lies in its robust, corrosion-resistant steel construction which stands up to harsh outdoor conditions, though users should note that the pin requires manual force for insertion into compacted or rocky soil.
| Model Part Number | 10 X 1200mm |
|---|---|
| Brand | Faithfull |
The pin has a bar diameter of 10mm.
The total length of the pin is 1200mm.
While powder coated, these are intended for temporary use and will last significantly longer if stored indoors when not needed.
No, these are solid steel pins and will short out electric fencing systems. They should only be used for rope, plastic mesh, or hazard tape.
The pin has a functional tip, but it is best suited for standard ground. Extremely rocky or concrete-like soil will require pre-drilling.
Drive the pin deeper into the ground, or use a slightly angled approach so that the hook faces away from the direction of tension.
Clean the affected area with a wire brush, sand it lightly, and apply a touch-up of outdoor-grade metal paint to prevent further spreading.
Use a pilot hole tool or a sturdy steel bar to create an initial opening before inserting the fencing pin.
To set up your perimeter, clear the desired path of large rocks or debris that might interfere with the pin placement. Using a rubber or plastic mallet, drive the pin into the ground until it feels firm to the touch. When attaching materials, ensure the rope or tape is taut enough to be visible but not so tight that it pulls the pins out of alignment.
Regarding care, because the pins are powder coated, they should be cleaned of excess mud and debris before being stored in a dry, covered area. While they are designed for outdoor use, storing them away from constant moisture will significantly extend the lifespan of the powder-coated surface and prevent oxidation at the base.
