Dylon Fabric Hand Dye - Olive Green

This dye is best suited for natural fibers such as cotton, linen, viscose, ramie, modal, wool, and silk. Fabrics with more than 50% synthetic content will dye to a lighter shade, or not at all.

One 50g pack of Dylon Hand Fabric Dye is enough to dye 250 grams (approximately 0.55 lbs) of dry fabric to the full, rich shade. For larger or heavier items, you may need to use multiple packs to achieve the desired intensity.

Yes, adding salt is crucial for the dye to fix permanently to the fabric. Follow the instructions to add 250g of ordinary salt per pack of dye.

No, Dylon Hand Fabric Dye is specifically formulated for hand-dyeing. For machine dyeing, you would need to use Dylon Machine Fabric Dye products.

After proper rinsing and the initial wash, the color should be permanent. However, it's recommended to wash newly dyed items separately for the first few washes to ensure any excess dye is removed and to prevent potential color transfer.

If your fabric is a blend, the natural fibers will absorb the dye, while the synthetic fibers will not. This will result in a lighter, sometimes mottled, effect. The higher the synthetic content, the lighter the final color will be.

Ensure the fabric was clean and pre-washed to remove any finishes. Verify correct fabric weight; too much fabric for one pack will result in a lighter shade. Confirm the correct amount of salt was used and fully dissolved. Stir the fabric continuously in the dye bath for the recommended time to ensure even absorption.

Check the fabric composition. Dylon Hand Fabric Dye works best on natural fibers (cotton, linen, viscose, wool, silk). Synthetic fabrics (polyester, acrylic) will not absorb the dye. Ensure the water temperature was appropriate for the dye type and fabric.

Always protect your work area with plastic sheeting or newspaper. Clean up any spills immediately with a damp cloth and an all-purpose cleaner. For stubborn stains, a bleach-based cleaner may be necessary on non-porous surfaces. Wearing rubber gloves is essential to prevent skin staining.

This can happen if salt residues remain. Ensure the fabric is thoroughly rinsed after dyeing until the water runs completely clear. A subsequent wash with a fabric softener can help restore softness.