Best current price£11.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.99Visit shop B&Q - 2X Heavy Duty Adhesive Spray Ideal For CarpetsCarpet TilesHousehold RepairsCrafts & Hobbies Quick Drying Extra Strong Glue
Visit shop1 offer from £11.99
View price history by clicking the chart icon.
This pack of two 500ml bottles of Heavy Duty Adhesive Spray is ideal for DIY enthusiasts, homeowners, and crafters needing a reliable, fast-drying adhesive for a wide variety of projects. Its key benefit is a strong, professional-grade bond on diverse materials, though users should be mindful of its strong fumes during application. The spray offers a versatile solution for bonding carpets, flooring, fabrics, and more with an adjustable nozzle for precise control.
| Brand | SuperGift.com |
|---|
While the bond sets quickly, full curing time can vary depending on the materials and environmental conditions. It is generally recommended to allow at least 24 hours for the bond to reach its maximum strength before subjecting it to heavy stress.
The adhesive provides a strong bond but is not intended for continuous submersion in water. For applications exposed to moisture, additional sealing or protection may be required.
Yes, it can be used on fabric for crafts and repairs. For items that will be washed frequently, it's advisable to test the bond's durability through washing cycles.
While the adhesive is still wet, it can typically be wiped away with a clean cloth. For dried adhesive, a solvent like mineral spirits might be effective, but always test on an inconspicuous area first.
No, the cans can be used independently. Store the second can according to the care instructions for later use.
Always use in a well-ventilated area to avoid inhaling fumes. Wear gloves and eye protection. Avoid contact with skin and eyes. Keep away from heat and open flames.
Ensure the can is shaken thoroughly before use. Check the nozzle for blockages and clean if necessary. Adjust the nozzle setting for wider or narrower spray.
Verify that surfaces were clean, dry, and free of contaminants before application. Ensure adequate adhesive was applied. For porous materials, consider applying to both surfaces.
Invert the can and spray for a few seconds to clear the nozzle. If still blocked, remove the nozzle (if possible) and soak it in a suitable solvent, then rinse and dry before reattaching.
Use the adjustable nozzle for precise application. Mask off surrounding areas with paper or tape before spraying. Wipe away any excess wet adhesive immediately with a cloth.
Setup: Ensure the surface to be bonded is clean, dry, and free from dust, grease, or oil. Shake the can well before use. Test the spray pattern and adhesion on an inconspicuous area first. Hold the can upright, about 6-10 inches from the surface. Use the adjustable nozzle to control the spray width. Apply evenly to one or both surfaces as required by your project.
Compatibility: This adhesive is compatible with a wide array of materials including paper, cardboard, fabric, leather, carpet, foam, plastic, metal, and wood. Avoid using on polystyrene foam or certain plastics where it may cause melting. Always test on a small, hidden area if unsure.
Care: Store cans in a cool, dry place away from direct sunlight and heat. Keep out of reach of children. Ensure the nozzle is clear after use by inverting the can and spraying for a few seconds until clear propellant emerges. Use in a well-ventilated area to avoid inhaling fumes.
