Best current price£1.24from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£1.24Visit shop Timco 0860Cscp Coach Screws - Hex - Zinc 8.0 X 60 Timpac 5
Visit shop
B&Q£5.35Visit shop B&Q - Coach Screws Hex Head Silver 8.0 X 60
Visit shop4 offers from £1.24 - £7.50
View price history by clicking the chart icon.
The Timco Coach Screw is an essential heavy-duty fastener designed for professional builders, landscapers, and DIY enthusiasts requiring robust connections for timber-to-timber or masonry projects. Its primary benefit is the combination of a high-strength hex head for maximum torque and a durable zinc finish for corrosion resistance; however, users should be aware that pre-drilling pilot holes is necessary when working with dense hardwoods to prevent splitting.
| Colour | Silver |
|---|---|
| Model Part Number | 0860CSCP |
| Brand | Timco |
These screws are zinc-plated and suitable for sheltered outdoor use, but they are not recommended for coastal or high-corrosion environments.
The Timco 8.0mm Coach Screw typically requires a 13mm socket.
In many softwoods, the screw can self-tap, but it is always best practice to drill a pilot hole to ensure accuracy and prevent splitting.
The pilot hole should be the full depth of the screw's penetration into the timber.
Yes, when used with appropriate wall plugs for masonry or secured directly into studs for timber, they offer excellent load-bearing capacity.
Zinc plating provides excellent temporary protection but will eventually corrode in exposed, wet, or salty conditions.
The pilot hole is likely too small or non-existent; ensure you drill a pilot hole in hardwood.
Ensure the socket size is exactly 13mm or the size specified for the head and that it is fully seated.
The screw is likely too close to the edge of the wood or a pilot hole is required to relieve internal pressure.
For optimal results, ensure your socket tool is properly seated on the hex head before applying force. If driving into masonry, always verify that your nylon plug is rated for an 8mm screw. To maintain the integrity of the zinc finish, avoid using impact drivers with excessive force that could strip the coating. If you notice any signs of white oxidation, you can lightly coat the screws in a silicone-based lubricant. Always store these in a dry, low-humidity environment to prevent early surface corrosion on the zinc finish.
