Best current price£37.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£37.00Visit shop B&Q - Tiletastic Grey Pebble Effect Interlocking Garden Patio Floor Tiles 29Cm X 29Cm X 0.13Cm (12 Tiles)12 SqftEasy-Lock
Visit shop2 offers from £37.00
View price history by clicking the chart icon.
The HSD Tiletastic Grey Pebble Effect Interlocking Garden Patio Floor Tiles are designed for homeowners looking to create a stylish and durable outdoor living space with minimal effort. They offer a realistic natural stone look and a slip-resistant surface, making them ideal for patios, balconies, and garden paths. A key benefit is the easy, tool-free interlocking installation. However, the tiles require a level surface for optimal performance and longevity.
| Colour | Grey |
|---|---|
| Brand | HSD |
Each pack contains 12 tiles, which cover approximately 12 square feet.
No, the Easy-Lock system is designed for tool-free installation. You may need basic tools for preparing the sub-base if necessary.
Yes, they can be installed on a balcony, provided the balcony surface is level, stable, and can support the weight of the tiles.
Yes, they are durable and weather-resistant, designed for year-round outdoor use.
Clean with a stiff brush and water, or a mild detergent for tougher stains. Rinse thoroughly. Avoid abrasive cleaners.
These tiles are not designed to be cut. They are intended to interlock as they are. If precise fitting is needed, consider starting and ending with partial tiles if possible, but cutting is not advised.
A clean, dry, level, and firm base is required. This can be existing concrete, a prepared patio, or compacted ground.
Check that the interlocking edges are clean and free of debris. Ensure the base surface is perfectly level. Try lifting and reseating the tile.
The sub-base may not be level. Remove affected tiles and re-level the ground before reinstalling. Ensure tiles are fully clicked into place.
While designed to be slip-resistant, any outdoor surface can become slick when wet. Exercise caution and ensure no excessive water is pooling.
This may indicate an unstable or uneven sub-base, or excessive weight being placed on a small area. Ensure the base is properly prepared and distribute weight evenly.
Setup: Ensure the sub-base is clean, dry, level, and firm. Remove any debris or uneven patches. Lay the tiles starting from one corner or edge, aligning the interlocking edges and pressing down firmly until they click into place. No special tools or adhesives are required.
Compatibility: These tiles are designed for outdoor use on level, stable surfaces like concrete, existing patios, or well-compacted ground. They are not recommended for installation on loose gravel, soft earth, or uneven terrain without proper preparation of the base.
Care: Clean the tiles periodically with a stiff brush and water. For tougher dirt, a mild detergent can be used. Rinse thoroughly with clean water. Avoid using abrasive cleaners or high-pressure washers, as these may damage the surface finish. Ensure adequate drainage to prevent water pooling on the surface.
