Shopping.co.uk

Kenable RJ45 Network Tester Kit - KA211

Kenable RJ45 Network Tester Kit - KA211

The Kauden KA211 is a complete three-part network testing kit for installers, system integrators, ...

Best current price£34.00from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

4 offers from £34.00 - £44.67

View price history by clicking the chart icon.

eBayKauden KA211 RJ45 Network Tester Kit with PoE Checker & QC Plug Test
Free delivery in 1–3 days
£34.00
Visit shop
B&QB&Q - Kauden Ka211 Rj45 Network Tester Kit With Poe Checker & Qc Plug Test
Free delivery in 1–3 days
£44.67
Visit shop
OnBuy.comKenable Kauden Ka211 Rj45 Network Tester Kit With Poe Checker & Qc Plug Test
Free delivery in 1–3 days
£44.67
Visit shop

Product Information

Full details

The Kenable KA211 is a comprehensive three-part network testing kit designed for IT professionals, installers, and system integrators. It offers a complete solution for verifying network installations and troubleshooting connectivity issues by combining a full-featured cable tester with a dedicated PoE checker. Key features include robust cable fault detection, a unique RJ45 plug QC test for quick crimp verification, and broad PoE standard compatibility. A potential caveat for users is that it requires a single AA battery, which is not included.

All features

Model Part NumberKA211
Brandkenable

Extended Product Information

FAQs

What is the main benefit of the 'QC' Single Head Test feature?

The 'QC' test allows you to test the pin condition and crimp quality of an RJ45 plug in isolation. This saves time by letting you verify your crimping work is correct without needing to test the entire length of the cable.

Does the kit come with batteries?

No, the Kenable KA211 kit requires one 1.5V AA Alkaline battery for the main tester, which is not supplied with the product.

What PoE standards can the XT403 PoE Checker detect?

The XT403 checker is designed to detect IEEE 802.3af (PoE), 802.3at (PoE+), 802.3bt (PoE++), and also supports detection for 24V and 48V Passive PoE systems.

Can I test non-Ethernet network cables with this kit?

No, this kit is specifically designed for testing standard RJ45 Ethernet cables. It is not compatible with other types of network cabling.

What happens if I accidentally connect the tester to a live PoE port?

The main tester unit features over-voltage protection, which is designed to safeguard it from damage if accidentally plugged into a live PoE circuit.

How do I choose between the two testing speeds?

The dual-speed test function allows you to select a faster test for quick checks or a slower, more thorough test. This is typically controlled by a switch or button on the main tester unit, allowing you to adapt to your workflow.

Troubleshooting

Main tester does not power on.

Ensure a new 1.5V AA Alkaline battery is correctly installed, observing polarity. Check the battery contacts for dirt or corrosion.

Cable test shows incorrect wiring or no continuity.

Verify that both ends of the cable are firmly seated in the main tester and the remote terminator. Re-crimp or replace the RJ45 connector if the 'QC' test also fails or if the cable is suspected of damage.

PoE checker does not indicate PoE detected.

Confirm the port is actually powered and configured for PoE. Ensure the PoE checker is connected directly to the port or cable end. Test with a known working PoE port if possible.

Tester appears damaged after connecting to a PoE port.

The over-voltage protection should have prevented damage. However, if the unit is unresponsive, try replacing the battery and testing again. If the issue persists, contact customer support.

Pros and Cons

Pros

  • Provides a complete solution for both cable testing and PoE verification.
  • The 'QC' plug test is highly useful for verifying crimp quality quickly.
  • Supports a wide range of PoE standards, including the latest PoE++.
  • Includes over-voltage protection for the main tester.
  • Dual testing speeds offer flexibility.

Cons

  • Requires a single AA battery, which is not supplied with the kit.
  • The remote terminator must be attached to the cable for full testing.
  • Primarily designed for RJ45 Ethernet cables; not suitable for other network types.

Setup, Compatibility & Care

Setup:

  1. Battery Installation: Open the battery compartment on the main tester unit and insert a single 1.5V AA Alkaline battery (not supplied), observing correct polarity.
  2. Cable Testing: Connect one end of the Ethernet cable to the main tester and the other end to the remote terminator. Press the 'TEST' button on the main unit.
  3. PoE Checking: Connect the XT403 PoE checker adapter to the port you wish to test. If a PoE source is detected, indicator lights will illuminate.

Compatibility:

  • The cable tester is designed for standard RJ45 Ethernet cables (e.g., Cat5e, Cat6, Cat6a).
  • The PoE checker is compatible with IEEE 802.3af (PoE), 802.3at (PoE+), 802.3bt (PoE++), and 24V/48V Passive PoE standards.

Care:

  • Keep the tester and PoE checker clean by wiping with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.
  • Store the kit in a dry environment, away from extreme temperatures.
  • Remove the battery if the device will not be used for an extended period to prevent leakage.

Price History

DatePrice
Visit shop