Best current price£30.52from eBay
Shopping.co.uk recommended and popular offers
eBay£30.52Visit shop 3 x Novol Spectral UNDER 395 Epoxy Primer 500ml Aerosol Colour: Light Grey
Visit shop2 offers from £30.52 - £33.46
View price history by clicking the chart icon.
The Spectral Bare Metal Anti-Corrosive Smooth Service Primer is designed for DIY enthusiasts and professionals seeking to restore or protect metal surfaces. It offers the primary benefit of creating a high-adhesion, corrosion-resistant base layer that ensures topcoat durability and a professional finish. While highly effective, users should note that proper surface preparation is essential, as the primer will not adhere correctly to surfaces contaminated with oil, grease, or loose rust.
| Colour | Grey |
|---|---|
| Model Part Number | Bare Metal Anti-Corrosive Smooth Service Primer |
| Brand | Spectral |
This primer is specifically formulated for bare metal. It is best to strip the existing paint back to the bare metal for optimal performance.
It is compatible with most standard topcoats, but always test on a small, inconspicuous area to ensure chemical compatibility.
No, this is a service primer. It must be covered with a suitable topcoat to protect it from UV light and environmental damage.
Refer to the drying time instructions on the label, which vary based on ambient temperature and humidity.
Check the product data sheet; while effective on most bare metals, some galvanized surfaces may require a specific etching primer.
The surface was likely not cleaned or degreased properly before application. Strip the area, clean it thoroughly, and reapply.
This often occurs if the primer is applied from too far away or in high-heat conditions. Ensure correct spray distance and apply in a cooler environment.
You are applying too much product at once. Use lighter, multiple coats instead of one heavy application.
Before application, ensure the workspace is well-ventilated and the ambient temperature is within the manufacturer's recommended range for optimal flow. The surface must be completely dry. To maintain the product, always keep the container tightly sealed in a cool, dry place away from direct sunlight to prevent premature thickening of the formula. When cleaning brushes or spray equipment, use the manufacturer-recommended solvent to ensure all residue is removed, which prevents equipment damage and ensures the tool is ready for your next project.
