Best current price£25.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£25.00Visit shop B&Q - Galvanised Cruising Crown Stock Anchor 2.5Kg (Danforth Style Spade Marine Fishing Boat)
Visit shop1 offer from £25.00
View price history by clicking the chart icon.
This 2.5kg Cruising Crown Stock Anchor, also known as a Danforth or Crown Stock Anchor, is designed for boaters seeking high holding power. Its adjustable angle mechanism optimizes stability and resistance in various seabeds. While offering excellent performance, its effectiveness can depend on the seabed type and proper deployment.
| Model Part Number | SFANC02.5 |
|---|---|
| Brand | SecureFix Direct |
This anchor weighs 2.5 kilograms.
It refers to the design where the stock is integrated into the crown of the anchor, creating a robust structure, and is another name for the Danforth-style anchor.
It is best suited for sand and mud seabeds where it can effectively dig in and hold.
The mechanism for adjusting the fluke angle is typically integrated into the design and may require loosening a bolt or set screw to pivot the flukes to the desired position before re-tightening.
The overall length is 500mm and the overall width is 330mm.
Yes, when deployed with adequate rode scope (typically 7:1 in heavy weather), this anchor provides high holding power suitable for strong winds.
Rinse with fresh water after use and inspect periodically. Touch up any chipped areas with a suitable galvanizing compound to prevent corrosion.
Ensure sufficient rode scope is deployed. Check the seabed type; this anchor performs best in sand or mud. Adjust the fluke angle if possible. Reduce boat speed during setting.
Check rode scope and ensure it is adequate for the conditions. Verify that the anchor has not fouled on an object. Try setting again in a different location if possible.
Attempt to pull the anchor up from a different direction by motoring slowly in a wide circle around the anchor's position. Ensure the bitter end of the rode is secure.
Clean the affected area and apply a suitable cold galvanizing compound or touch-up paint to protect the steel from further corrosion.
Setup: The anchor is designed for straightforward deployment. Ensure the anchor rode (chain and/or rope) is securely attached to the anchor's shackle point. Adjust the fluke angle mechanism as needed for the expected seabed conditions before deployment. A common recommendation is to set the angle to around 30-35 degrees for most soft seabeds.
Compatibility: This 2.5kg anchor is generally suitable for small to medium-sized recreational boats, dinghies, and tenders. Compatibility with bow rollers or anchor windlasses should be checked against the anchor's dimensions (Overall Length: 500MM, Overall Width: 330MM).
Care: After each use, rinse the anchor thoroughly with fresh water to remove salt and debris. Inspect the galvanized finish for any damage and touch up if necessary to prevent rust. Store the anchor in a dry location, ensuring it does not chafe against other equipment.
