Hammerite Direct to Rust Metal Paint Smooth Finish - Dark Blue

Yes, provided the existing paint is sound and well-adhered. Lightly abrade the surface and ensure it is clean and dry before applying Hammerite.

No, Hammerite Direct to Rust Metal Paint is specifically formulated to be applied directly onto rust and clean metal without the need for a primer or undercoat.

The paint is touch dry in approximately 2 hours. It can be recoated after 4 hours.

The coverage rate is approximately 5 square meters per litre, depending on the surface porosity and application method.

This paint offers up to 8 years of protection against corrosion and the elements when applied correctly.

Yes, it is suitable for both ferrous and non-ferrous metals, including aluminum and galvanized steel. For galvanized steel, ensure it is clean and dry. A light sanding can help adhesion.

Good quality brushes or rollers are recommended for application.

Ensure the metal surface was properly cleaned and free from grease or oil. For very smooth or non-porous surfaces, a light abrasion may be needed before application.

Apply thinner coats and use a good quality brush or roller. Avoid overworking the paint. Ensure paint is well-stirred before use.

Ensure all loose rust was removed and the paint was applied directly to the remaining stable rust. Two coats are essential for complete coverage and protection.

Stir the paint thoroughly. If the paint is unusually thick due to storage, ensure it is within its usable life. Avoid applying in very cold temperatures which can affect viscosity.