Best current price£234.08from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£234.08Visit shop Heatrae Sadia Express Oversink Vented 7 Litre 1Kw Water Heater 95010160 5012496101609
Visit shop
B&Q£242.59Visit shop B&Q - Express Oversink Vented 7 Litre 1Kw Water Heater 95010160Out Of Stock
Visit shop3 offers from £234.08 - £242.59
View price history by clicking the chart icon.
The Heatrae Sadia Express 7 Litre 1KW Water Heater (95010160) is designed for point-of-use applications where immediate hot water is needed, ideal for small workshops, garages, or single washbasins. Its key benefit is providing readily available hot water without the need for extensive pipework. A potential consideration is its 7-litre capacity, which is best suited for light-duty tasks rather than high-demand scenarios. This electric, vented water heater features a 1kW element for fast heat-up, a durable copper interior, and an adjustable thermostat for temperature control.
| Model Part Number | 95010160 |
|---|---|
| Brand | Heatrae Sadia |
A vented water heater requires an open vent pipe and is installed above the sink or basin it serves. It operates at low pressure and is often used for point-of-use applications.
With a 1kW element, the 7-litre tank will heat up relatively quickly, typically within 15-20 minutes from cold to a usable temperature, depending on the incoming water temperature and the set thermostat level.
No, this is an *oversink* vented water heater and must be installed above the sink or basin it serves. It is not designed for under-sink installation.
The Heatrae Sadia Express 7 Litre water heater comes with a 2-year guarantee from the manufacturer.
The temperature is adjusted using the control dial located on the unit. Turn the dial to your desired temperature setting.
Basic maintenance includes checking pipe connections for leaks and cleaning the exterior with a damp cloth. Depending on water hardness, periodic descaling by a professional may be beneficial.
No, the 7-litre capacity and 1kW output are not suitable for running a shower. This unit is designed for light tasks at a single tap.
Check the power supply to the unit. Ensure the thermostat is set to the desired temperature. Verify that the circuit breaker has not tripped. If the issue persists, the heating element may need inspection by a qualified technician.
Inspect all pipe connections for tightness. Check the integrity of the inlet and outlet hoses. If the leak is from the tank itself, contact customer support or a qualified plumber.
Adjust the thermostat control dial to the desired temperature. Ensure the thermostat is not obstructed and is functioning correctly. If the temperature is consistently incorrect, the thermostat may need calibration or replacement by a professional.
Some noise during heating is normal due to expansion. However, loud banging or whistling may indicate scale buildup or an issue with water pressure. Descaling might be necessary. Consult a qualified service engineer.
Setup: This is a *vented* water heater, meaning it requires connection to an open-vented system and must be installed above the sink or basin it serves. Ensure a secure mounting bracket is used. Connect the cold water inlet and hot water outlet pipes according to local plumbing regulations. Electrical connections should be made by a qualified electrician, ensuring the unit is properly earthed and protected by an appropriate fuse or circuit breaker.
Compatibility: Designed for use with standard cold water mains supply. It is compatible with most standard plumbing fittings. Ensure your electrical supply can support a 1kW load.
Care: Regular maintenance is minimal. Periodically check the plumbing connections for leaks. The exterior can be cleaned with a damp cloth. Do not use abrasive cleaners. The thermostat should be checked annually to ensure it is functioning correctly. Descaling may be required depending on water hardness in your area; consult a qualified engineer if performance degrades.
