Best current price£87.34from eBay
Shopping.co.uk recommended and popular offers
eBay£87.34Visit shop Hammerite 10litre Clear Refill WaxOyl Rust Eliminator Proof Prevention Covering
Visit shop3 offers from £87.34 - £95.34
View price history by clicking the chart icon.
Hammerite WaxOyl is an essential solution for automotive enthusiasts and home maintenance users seeking long-term protection against oxidation. By forming a flexible, weather-resistant barrier, it effectively stops existing rust and prevents new corrosion from developing on metal surfaces. While highly effective at sealing, the thick, oily consistency requires careful application and can be messy to work with in tight spaces.
| Model Part Number | 5092941 |
|---|---|
| Brand | Hammerite |
No, it is not designed as a primer. Because of its oily, wax-based composition, paint will not adhere to the surface properly.
Yes, it is suitable for iron and steel. However, it should be tested on small areas if used on non-ferrous metals.
Reapplication depends on environmental conditions. In harsh, wet, or salty climates, an annual inspection is recommended.
No, the cured film is highly resistant to water and road spray, though it can be removed with specialized solvent-based degreasers.
It is not recommended for engine blocks or exhaust systems, as the high heat will cause the wax to melt and run.
The product is designed to remain flexible; however, if it does not set after several days, ensure the application was not excessively thick and that the ambient temperature is above 10 degrees Celsius.
The viscosity of WaxOyl can increase in cold temperatures. Gently warm the container in a warm water bath before application to improve flowability.
You may have applied too much at once. Apply in several thin layers rather than one heavy coat to allow the solvent to evaporate properly.
To achieve the best results, ensure the metal surface is as dry and clean as possible before application. While WaxOyl is designed to work over light rust, removing heavy debris will significantly improve adhesion. It can be applied using a brush for targeted spots or a high-pressure spray system for large, open areas. Because the formula is oil-based, avoid applying it near rubber components that may react with petroleum-based products. To maintain the protection, periodically inspect the surface for areas where the coating may have been scraped away by debris and touch up as necessary. Store the container in a cool, dry place and ensure the lid is sealed tightly to prevent evaporation or contamination.
