Best current price£10.63from The Range
Shopping.co.uk recommended and popular offers
The Range£10.63Visit shop Jcp Fixings Eta Drop-In Anchors Ce Bright Zinc Plated - M10 X 40 (Box Of 50) - Silver
Visit shop14 offers from £10.63 - £20.07
View price history by clicking the chart icon.
The JCP Fixings ETA Drop-In Anchors are designed for professional contractors and DIY enthusiasts who require reliable, heavy-duty fastening solutions in solid concrete substrates. These anchors provide exceptional pull-out strength and structural stability, making them ideal for overhead installations, suspended ceilings, and equipment mounting. While they offer superior mechanical performance, users should note that they are specifically engineered for concrete and are not suitable for hollow brick or aerated concrete blocks.
| Colour | Silver |
|---|---|
| Model Part Number | 1427144 |
| Brand | JCP Fixings |
No, these anchors are specifically designed for use in solid concrete and will not expand correctly in softer materials like brick or blocks.
You will need a rotary hammer drill, a masonry drill bit, a hammer, a setting punch tool, and a cleaning brush for the hole.
The M8 x 30 is designed for medium-duty loads. Always check the ETA documentation for specific load-bearing capacity limits based on your concrete strength.
No, these are permanent mechanical fixings and cannot be extracted once the expansion plug has been set.
No, the setting tool is typically sold separately from the pack of anchors.
The drill hole is likely too large or the concrete is too soft/friable. Verify the drill bit diameter and test on a different area of the substrate.
Check for concrete dust or debris inside the anchor thread. Clean the threads thoroughly or use a tap to clear the blockage.
For proper installation, use a hammer drill to bore a hole into the concrete matching the diameter of the anchor. Clear all dust and debris from the hole using a brush or compressed air, as dust buildup can prevent the anchor from expanding correctly. Insert the anchor, and use a setting tool to drive the internal wedge down. When choosing your threaded rod or bolt, ensure it is compatible with the M8 thread size. While the anchors are coated, if using in outdoor or highly corrosive environments, consider applying a lubricant or ensuring proper sealing to maintain long-term integrity.
