Rustins Exterior Wood Oil Natural Finish - 500ml

The oil is quick-drying, typically touch-dry within 2 hours. Full curing may take longer depending on conditions.

Yes, provided the previous treatment is fully cured and compatible. Light sanding may help adhesion.

Coverage varies depending on the wood type and porosity, but generally expect approximately 8-10 square meters per liter.

Yes, it is suitable for use on decking, providing protection against weathering and moisture.

Reapplication is typically recommended annually, or when the wood begins to look dry or water no longer beads on the surface.

It is not recommended to paint or varnish over this oil, as it is designed to be a finishing oil that enhances the natural wood. However, if necessary, ensure the oil is fully cured and lightly abraded, though adhesion may be compromised.

This is the 'Natural Finish' variant, designed to enhance the wood's natural color. It does not add significant pigment but may deepen the wood tone slightly.

Ensure all excess oil was wiped off completely after application. A second or third coat may be needed for very dry or porous wood.

Surface may not have been prepared evenly, or excess oil was not removed uniformly. Ensure consistent application and removal of excess. Light sanding between coats can help.

Too much oil was applied, or excess was not wiped off thoroughly. This indicates the oil did not dry properly. This can often be rectified by buffing the surface with a clean cloth or applying a very thin coat of oil and wiping off immediately.

The protective layer may have worn down due to exposure. Reapply a thin coat of the wood oil following the standard application instructions.