Best current price£13.15from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.15Visit shop B&Q - Split Bolt Connector With Nut X10 (Joint Line Clamp Bolt Wire Cable Joiner)
Visit shop3 offers from £13.15
View price history by clicking the chart icon.
The SecureFix Direct Split Bolt Connector 10-pack is an essential hardware solution for professionals and DIY enthusiasts needing to create secure, reliable joints or loops in wire and cable. Ideally suited for wire fencing, landscaping projects, and general electrical tasks, these connectors offer a permanent clamping mechanism that ensures structural integrity under tension. While they provide excellent durability through their diecast zinc alloy construction, users should note that they are designed specifically for wire up to 2.5mm, making them unsuitable for larger-gauge heavy-duty industrial cables.
| Brand | SecureFix Direct |
|---|
No, these are strictly limited to wire up to 2.5mm and are not rated for heavy-duty electrical distribution lines.
You only need a standard 19mm wrench or an adjustable spanner to tighten the nut.
While the zinc alloy is durable, constant exposure to salt spray will eventually corrode the material. Regular inspections or additional anti-corrosion coating are recommended.
Yes, they are designed to be removed and reused as long as the internal threads and the bolt structure remain undamaged.
These connectors utilize a standard M12 thread with a 1.75mm pitch.
Ensure the wire gauge is not below the minimum grip range; if the wire is too thin, the bolt may bottom out before clamping fully.
Check the M12 threads for debris or rust. If the threads are clean, use a high-quality lubricant spray to ease the friction on the bolt assembly.
This is a natural reaction of zinc alloys in moisture. Clean the surface with a wire brush and apply a protective anti-corrosion spray.
To install, loosen the 19mm nut until the split bolt provides enough space for your wire. Insert the two wire ends into the channel, ensuring they overlap sufficiently for the clamp to grip both sections securely. Tighten the nut firmly with a wrench until the wires are held in place with no detectable movement. Compatibility is limited to cables or wires with a maximum diameter of 2.5mm. For maintenance, periodically inspect the connectors in outdoor fencing to ensure the nuts have not loosened due to extreme weather cycles. If the zinc finish shows signs of significant scratching, applying a thin layer of weather-resistant grease can help maintain the integrity of the alloy in harsh, salt-heavy, or humid environments.
