Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop Hycote Spray Paint VW Shadow Blue Pearlescent 150ml + Grey Primer & Lacquer Kit
Visit shop3 offers from £16.99 - £17.99
View price history by clicking the chart icon.
This Hycote Spray Paint kit is designed for automotive enthusiasts and DIYers looking to achieve a professional-quality finish on their vehicles, specifically matching VW Shadow Blue Pearlescent. Its key benefit is the combination of a color-matched paint, primer, and lacquer for a complete solution, offering superior coverage and durability. A potential caveat is the need for proper surface preparation and application techniques to achieve optimal results.
| Colour | Blue |
|---|---|
| Model Part Number | XDPB908,XDVW606,XDPB901 |
| Brand | Hycote |
| Container Volume | 150ml |
This spray paint is designed for automotive applications and is compatible with primed surfaces, OEM finishes, acrylic, and cellulosic paints. Ensure surfaces are clean and prepared.
The paint is fast-drying. However, specific drying times for touch can vary depending on temperature and humidity. Refer to the can for detailed drying instructions between coats and for full curing.
Yes, the paint is matched to the specific manufacturer's color code for VW Shadow Blue Pearlescent, designed to match original finishes.
While designed for metal automotive surfaces, it is compatible with primed surfaces. For plastics, ensure you use a suitable plastic primer first to guarantee adhesion.
It is recommended to apply the paint in light, even coats, allowing 5-10 minutes drying time between each coat for optimal coverage and finish. Typically, 2-3 color coats are sufficient, followed by the clear lacquer.
The Grey Primer provides an ideal base for the paint, ensuring superior coverage and adhesion. The Clear Lacquer protects the color coat from UV damage, fading, and provides a high-gloss finish.
Store the cans in a cool, dry place away from direct sunlight and heat sources. Ensure they are upright and secure.
Apply paint in lighter, more frequent coats. Ensure the can is held at the correct distance (25-30cm) and move it continuously. Avoid over-application in one area.
Ensure the surface was thoroughly cleaned, degreased, and lightly abraded before priming. Re-prepare the surface and reapply primer, paint, and lacquer.
Ensure application occurred in a well-ventilated area with appropriate temperature and humidity. Avoid applying too thickly. Check for compatibility issues with previous coatings.
Adjust spray distance and speed. If the effect is severe, allow to dry fully, then lightly sand and reapply the color coat and lacquer.
Immediately after use, turn the can upside down and spray for a few seconds to clear the nozzle. If clogged, remove and soak the nozzle in warm water and solvent, then dry thoroughly.
Setup:
Compatibility:
This paint is compatible with OEM finishes, acrylic, and cellulosic paints. It is specifically formulated for automotive applications.
Care:
To maintain the finish, clean surfaces with mild car shampoo and water. Avoid abrasive cleaners or polishes, especially on the freshly painted areas, until fully cured. Protect from extreme temperatures.
