Shopping.co.uk

ENER-J Shower Panel - Light Grey Marble Matt Finish - 2400X1000X10mm

ENER-J Shower Panel - Light Grey Marble Matt Finish - 2400X1000X10mm

Refresh your bathroom with the subtle elegance of BRITWALL’s Light Grey Marble Matt PVC Shower Pan...

Best current price£365.00from Homebase

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Homebase£365.00Visit shop

Britwall Marble Matt Finish Shower Panel Light Grey 2400 X 1000 X 10Mm 3 Pack

Visit shop

All Offers

3 offers from £365.00

View price history by clicking the chart icon.

HomebaseBritwall Marble Matt Finish Shower Panel Light Grey 2400 X 1000 X 10Mm 3 Pack
Free delivery in 1–3 days
£365.00
Visit shop
wilkoBritwall - Shower Panel - Light Grey Marble - 2400 x 1000 x 10mm - 3 Pack
Free delivery in 1–3 days
£365.00
Visit shop

Product Information

Full details

This ENER-J Shower Panel is designed for homeowners and renovators seeking a modern, elegant, and low-maintenance bathroom upgrade. Its key benefit is providing a seamless, waterproof, and grout-free finish that is quick to install. A potential caveat is the specific dimensions (2400x1000x10mm) which require careful planning for your space. The panel features a subtle light grey marble matt effect, is fully waterproof and flameproof, and weighs just 11.5kg for easier handling.

All features

Model Part Number2400X1000X10mm
BrandENER-J

Extended Product Information

FAQs

Is this panel suitable for a wet room environment?

Yes, the panel is fully waterproof and designed for use in shower areas and wet rooms.

Do I need to grout this panel?

No, the key advantage of this panel is its grout-free installation, which helps prevent mold and mildew.

What tools are needed for cutting the panel?

A sharp utility knife for scoring and snapping, or a fine-toothed saw. Ensure the blade is suitable for PVC.

How heavy is the panel?

The panel weighs only 11.5kg, making it relatively easy to handle and install.

Can I install this panel over existing tiles?

It is best to remove existing tiles for a smooth, flat surface. If installing over tiles, ensure they are perfectly flat and sound, and use a suitable adhesive for the substrate.

What is the recommended adhesive?

Use a high-grab, waterproof adhesive specifically designed for PVC panels. Consult with your local hardware store or adhesive manufacturer for recommendations.

How do I clean the matt finish?

Wipe with a soft, damp cloth and a mild, non-abrasive cleaner. Dry immediately to prevent water marks.

Troubleshooting

Panel is not adhering well

Ensure the wall surface is completely dry and free of dust or grease. Use the recommended adhesive and apply sufficient pressure during installation.

Cutting the panel results in chipping

Use a fine-toothed saw or score the panel deeply with a sharp utility knife and then snap it. Ensure your cutting tool is sharp and take slow, controlled cuts.

Water seeping through joints

Re-apply waterproof silicone sealant to all edges and seams. Ensure all trims are securely fitted and sealed.

Matt finish shows streaks

Clean with a soft cloth and a very mild, diluted detergent. Wipe dry immediately after cleaning to prevent water spots from drying on the surface.

Pros and Cons

Pros

  • Provides a modern, sophisticated look with its marble effect.
  • Grout-free design simplifies cleaning and maintenance.
  • Waterproof and flameproof properties enhance safety and durability.
  • Lightweight nature makes installation easier and faster.
  • Cost-effective alternative to natural stone or high-end tile installations.

Cons

  • Specific dimensions may not fit all shower spaces without cutting.
  • Requires careful handling during cutting to avoid chipping or cracking.
  • Matt finish may show water spots more readily than gloss finishes if not wiped down.
  • May require specific adhesive and sealing techniques for optimal performance.

Setup, Compatibility & Care

Setup:

  1. Ensure the wall substrate is clean, dry, and structurally sound.
  2. Measure and cut the panel to size using appropriate tools for PVC (e.g., a fine-toothed saw or utility knife for scoring and snapping).
  3. Apply a suitable waterproof adhesive designed for PVC panels to the back of the panel or the wall surface.
  4. Press the panel firmly into place, ensuring it is level and aligned.
  5. Use edge trims and corner profiles for a clean, sealed finish. Apply waterproof silicone sealant to all edges and joints.

Compatibility:

  • Compatible with standard timber or metal stud framing.
  • Suitable for direct application over existing waterproofed surfaces like concrete or plasterboard (ensure substrate is sound).
  • Requires compatible adhesives and silicone sealants for PVC.

Care:

  • Clean regularly with a soft, damp cloth and mild, non-abrasive detergent.
  • Avoid harsh chemicals, scouring pads, or abrasive cleaners that could damage the matt finish.
  • Wipe down after use to prevent water spots, especially in hard water areas.

Price History

DatePrice
Visit shop