Best current price£74.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£74.75Visit shop B&Q - 5 PackSatin / Brushed Chrome 10A 2 Gang 2 Way Ingot Light SwitchWhite TrimSe Home
Visit shop1 offer from £74.75
View price history by clicking the chart icon.
This 5-pack of SE Home Satin / Brushed Chrome 2 Gang 2 Way light switches is designed for homeowners and DIY enthusiasts seeking a modern, classic upgrade to their interior lighting controls. The key benefit is the elegant brushed spiral effect finish combined with the convenience of 2-way switching, allowing lights to be controlled from multiple locations. A potential consideration is that these are specific to UK back boxes, and professional installation is recommended for electrical work.
| Colour | White |
|---|---|
| Brand | SE Home |
2-way switching means you can control a light (or group of lights) from two separate locations. For example, you can have a switch at the top and bottom of stairs, or at either end of a hallway, to control the same light.
Yes, these switches are generally compatible with LED lights, provided the total wattage of the LEDs does not exceed the switch's 10A rating. For dimmable LEDs, ensure you are using a compatible dimmer switch, not this standard on/off switch.
Satin or brushed chrome has a matte, textured finish that diffuses light and is less prone to showing fingerprints. Polished chrome has a smooth, reflective, mirror-like finish.
No, these switches are designed to fit into standard UK wall back boxes with a depth between 25mm and 35mm.
While durable, these switches are not specifically rated for high-moisture areas like bathrooms or kitchens. Always ensure electrical accessories installed in such areas meet specific IP ratings for safety.
Use a soft, dry or slightly damp cloth. Avoid abrasive cleaners which can scratch the finish. For stubborn marks, a mild soap solution followed by a clean damp cloth and then drying with a soft cloth should suffice.
'2 Gang' refers to the number of switches on a single plate. This plate has two independent switches.
Verify that power to the circuit has been restored. Double-check wiring connections against the instructions and ensure all wires are securely terminated. Confirm the correct terminals (Live, Switched Live, Loop) are used for 2-way switching.
Check for loose wire connections at the switch terminals and in the back box. Ensure the switch is rated for the load it is controlling. If the issue persists, the switch itself may be faulty.
Tighten the mounting screws securing the switch plate to the wall box. Ensure the wall box is securely fixed within the wall.
Setup:
Compatibility:
Care:
