Bond it Lami mate & Timber Sealant Gap Filler - Pine

Drying time depends on the gap size and environmental conditions. Allow at least 24 hours for full curing before painting or staining.

Yes, Lami-Mate is suitable for both interior and exterior use. Ensure the area is protected from direct, prolonged exposure to water.

Yes, Lami-Mate can be painted or stained once it has fully cured. Use a paint or stain suitable for the surrounding wood.

Shelf life is typically 12-18 months when stored in a cool, dry place and the original packaging is unopened.

Lami-Mate is water-resistant, protecting against water ingress. However, it is not designed for constant water submersion.

Store in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the nozzle is sealed after use.

Use a sealant gun for precise application. Cut the nozzle to the desired bead size and apply evenly. Smooth with a wet finger or tool.

While primarily designed for wood, Lami-Mate may adhere to tiles. However, test on a small, inconspicuous area first to ensure compatibility and adhesion.

Ensure the surface is clean, dry, and free of any contaminants. Roughening the surface slightly can also improve adhesion.

This may indicate excessive movement or the gap is too wide. Ensure the gap is within the recommended 8mm range. If movement is excessive consider a more specialized sealant.

Use a wet finger or smoothing tool to create a smooth finish immediately after application. Ensure adequate working time is observed.

Ensure the product is specifically pine colour. Test the sealant on a small area to see the outcome and if needed, you can paint or stain it.