Varilight Rocker Switches - 4 Gang - Silver

This is a standard on/off rocker switch and does not have dimming capabilities. While it can control dimmable LED bulbs, it will only turn them on or off. For dimming functionality, a separate dimmer switch is required. Ensure your LEDs are compatible with the switch type.

A 1-way switch controls a light from a single location. A 2-way switch allows a light to be controlled from two separate locations (e.g., top and bottom of stairs). This Varilight switch supports both configurations.

Each gang on this switch is rated for a maximum load of 10 Amps. Ensure the total wattage of the lights connected to each gang does not exceed the recommended limit (e.g., typically around 2400W incandescent, but lower for LEDs depending on their driver).

No, this switch is designed for indoor use only and does not have an IP rating for water or dust resistance.

Wipe clean with a soft, dry cloth. For tougher marks, use a slightly damp cloth and then dry immediately. Avoid abrasive cleaners.

This product is designed to fit into standard UK electrical back boxes, which are usually pre-installed in the wall. The switch itself does not typically include a back box.

You can control mains voltage (230-240V) and low voltage lighting. This includes most types of incandescent, halogen, and LED bulbs.

Ensure power is restored. Check all wiring connections are secure and correct for 1-way or 2-way configuration. Verify the bulb is functional.

This switch is not a dimmer. If controlling dimmable LEDs, ensure compatibility. Check for loose wiring connections. Verify the total load does not exceed the 10 Amp rating.

Double-check the wiring for the specific gang. Ensure it is correctly connected to the circuit it's intended to control and that the circuit itself is live.

Ensure the switch is securely fastened to the back box. Check that the faceplate screws are tightened appropriately.