Snowdon Timber Door Casing Set - 2100mm x 106mm x 34mm - Pack of 2

The Snowdon Timber Internal Door Lining Set provides a clean, sturdy, and reliable frame for inter...

Best current price£72.50from B&Q

One Offer

1 offer from £72.50

View price history by clicking the chart icon.

B&QB&Q - Redwood Door Casing Set (T) 32mm (W) 106mm (H) 2.1MPack Of 2
Free delivery in 1–3 days
£72.50
Visit shop

Product Information

Full details

The Snowdon Timber Door Casing Set is an ideal solution for carpenters, DIY enthusiasts, and homeowners seeking a robust, professional-grade frame for internal doors. It offers exceptional structural support and a smooth finish that adapts to any aesthetic, though users should note that the pack requires assembly and finishing touches like painting or staining before installation is complete. Each set is designed to accommodate common door sizes, providing a reliable foundation for both modern and traditional interior designs.

All features

Model Part NumberM-DJ63949
BrandSnowdon Timber

Extended Product Information

FAQs

Does this set include the door itself?

No, this product is the door casing set only; it provides the frame for the door to be installed into.

Can this be used for exterior doors?

No, this timber set is designed specifically for internal use only.

Do I need to sand the wood before painting?

The timber is smooth planed, but a light hand-sanding with fine-grit paper is recommended before painting or staining to ensure the best adhesion.

Is the hardware (hinges/latches) included?

No, hinges, latches, and other door hardware must be purchased separately.

What is the thickness of the timber pieces?

The pieces are 34mm thick, which is standard for ensuring structural stability in door frames.

Troubleshooting

The frame is not square after assembly.

Loosen the fixings slightly, adjust the vertical legs until the corner square reads accurately, and re-tighten while ensuring the head is fully seated in the grooves.

Door does not fit snugly within the casing.

Verify that your measurements match the 686mm or 762mm standard sizes. If the opening is slightly larger, use shims behind the frame to achieve the necessary clearance.

Pros and Cons

Pros

  • Ready for immediate finishing such as staining or painting
  • Easy installation thanks to the pre-grooved friction-fit head
  • Consistent and reliable dimensions for a perfectly square frame
  • Suitable for both DIY home improvements and professional trade use

Cons

  • Requires manual assembly of the frame components
  • Finishing (painting/staining) is not included and must be applied by the user
  • Designed primarily for specific standard widths; may require adjustment for non-standard openings

Setup, Compatibility & Care

To install, ensure your opening is plumb and level before measuring and cutting the vertical side pieces to your desired floor height. Use the friction-fit grooves at the head to join the top horizontal piece with the vertical legs, checking for squareness using a carpenter’s square. Secure the assembly into the wall structure using appropriate fixings for your wall type (e.g., masonry anchors or wood screws).

Care instructions include regular dusting and cleaning with a soft, dry cloth. If the frame is painted, keep it free of moisture to prevent wood swelling. For long-term maintenance, re-apply varnish or wood treatment every few years if the timber is left natural to protect against environmental changes.

Price History

DatePrice
Visit shop