Metsä Wood - Smooth Planed Whitewood Spruce Stick Timber - 2.4M - 44mm - 18mm

This untreated whitewood spruce is primarily intended for indoor use. If used outdoors, it must be properly treated with an exterior-grade wood preservative and sealant to protect it from moisture, rot, and insects.

While it has a smooth planed finish, a light sanding with fine-grit sandpaper (e.g., 220 grit) is recommended to open the grain and ensure optimal adhesion for paint or stain. Always wipe away sanding dust thoroughly.

Standard woodworking tools such as hand saws, miter saws, drills, and clamps are suitable. For more intricate work, a router or jig saw can be used.

Store timber flat, supported evenly along its length, in a dry, cool, and well-ventilated indoor area to prevent warping, twisting, or moisture damage.

This timber is best suited for non-structural applications like internal framing, battens, shelving, or decorative trim. For load-bearing structural projects, always consult with a structural engineer and use timber rated for such purposes.

`PSE` stands for Planed Square Edge. It means the timber has been machined on all four sides to have smooth, consistent surfaces and precise right-angle edges, making it easier to work with and ensuring accurate dimensions.

Ensure timber is stored flat on a level surface, elevated from the ground, and in a climate-controlled environment to minimize moisture absorption and temperature changes.

Always pre-drill pilot holes before inserting screws or nails, especially close to edges or ends. Use appropriate fastener sizes for the timber dimensions.

Use a sharp saw blade designed for wood. Sand cut edges with progressively finer sandpaper (e.g., 80-120 grit, then 150-220 grit) to achieve a smooth finish.

Ensure the timber surface is clean, dry, and free of dust or oils. Lightly sand the surface with fine-grit sandpaper (220 grit) before applying finish, and wipe away all dust.