Recessed Aluminium LED Profile - ENER-J - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This ENER-J Recessed Aluminium LED Profile is for designers, installers, and homeowners seeking a clean, modern, and integrated lighting solution. Its key benefit is creating a seamless, flush ceiling or wall effect with diffused LED light. A potential caveat is the need for precise drywall installation for a truly trimless appearance.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 5061004719300 |
| Brand | ENER-J |
Extended Product Information
FAQs
What is the main advantage of this recessed profile?
The primary advantage is its ability to create a completely seamless, 'trimless' lighting effect, where the light appears to originate directly from the wall or ceiling surface without any visible fixture edges.
Can I use any type of LED strip with this profile?
This profile is designed for LED strips up to 55mm wide. For the best 'continuous' light effect, high-density LED strips (e.g., 120 LEDs per meter or more) are recommended.
Does the profile come with an LED strip or power supply?
No, the LED strip and the necessary power supply (driver) are sold separately. You will need to choose these components based on your desired brightness, color temperature, and project requirements.
How do I achieve a true 'trimless' look?
Achieving a trimless look requires careful installation. The profile is recessed into the drywall, and the integrated flange is then plastered over, effectively hiding the edges of the profile and blending it into the surrounding surface.
What material is the diffuser made of?
The diffuser is made of polycarbonate, which is durable and designed to provide even light diffusion.
Is this profile suitable for outdoor use?
This profile is designed for indoor drywall integration. Outdoor use would require specific environmental protection and sealing, which this product does not inherently provide.
What are the dimensions of the profile?
The profile dimensions are 55mm in width and 12.5mm in depth.
Troubleshooting
Uneven light diffusion after installation.
Ensure the correct density LED strip was used and that the diffuser is seated correctly. Check for any plaster imperfections on the diffuser surface.
Profile not sitting flush with the wall.
Verify the drywall recess was cut accurately to the profile's dimensions. Ensure the profile is adequately secured before plastering.
LED strip overheating.
Confirm the aluminum profile is functioning correctly for heat dissipation. Check that the LED strip's wattage does not exceed the profile's capacity and ensure proper ventilation.
Difficulty plastering over the flange.
Ensure the flange is clean and free of debris. Use a suitable joint compound and apply thin, even coats, allowing drying time between applications. Consider using mesh tape for stability if needed.
Pros and Cons
Pros
- Achieves a truly modern, minimalist, and integrated lighting look.
- Promotes better heat management for LED strips, potentially extending their lifespan.
- Provides uniform light output without visible LED dots.
- Durable aluminum construction ensures longevity.
- Easy to plaster over for a seamless finish.
Cons
- Requires precise installation and drywall finishing skills for the best trimless effect.
- Not suitable for surface mounting or applications where a visible profile is desired.
- LED strip and power supply are sold separately.
- May require additional support during plastering.
Setup, Compatibility & Care
Setup:
- Cut the aluminum profile to the desired length using a fine-toothed saw suitable for metal.
- Create a recess in the drywall or ceiling material sized to accommodate the profile's dimensions (55mm width, 12.5mm depth plus allowance for plaster).
- Secure the profile within the recess. Ensure it is level and firmly fixed.
- Install your chosen LED strip inside the profile. Connect wiring according to LED strip and power supply instructions.
- Apply jointing compound and plaster over the flange, feathering it out to blend with the surrounding drywall. Ensure the polycarbonate diffuser is protected during this process.
- Once the plaster is dry, gently sand smooth and finish as required. Remove any protective film from the diffuser.
Compatibility:
- Compatible with most standard LED strips up to 55mm wide.
- Requires a suitable LED driver (power supply) matched to the wattage and voltage of the LED strip used.
- Designed for integration with standard drywall and plastering systems.
Care:
- Clean the exterior of the profile and diffuser with a soft, damp cloth. Avoid abrasive cleaners.
- Ensure the LED strip and internal components remain dry.
- Periodically check for dust accumulation within the profile if the diffuser is removed.