Pilot Frixion Erasable Rollerball Pen - Blue - Pack of 2

Simply rub the special rubber tip on the end of the pen over the ink mark. The friction generated will cause the ink to disappear.

No, this pen is specifically designed to work with Pilot Frixion 0.7mm triple refill packs.

If the paper with Frixion ink on it is exposed to temperatures above 140°F (60°C), the ink will become invisible. The ink can reappear if the paper is cooled below 14°F (-10°C), but this is not always reliable.

No, the ink is designed to be erasable and is not permanent. It is not recommended for official documents or situations where ink permanence is crucial.

Unscrew the barrel of the pen, pull out the old refill, and insert a new Frixion 0.7mm refill. Screw the barrel back on securely.

No, the Pilot Frixion eraser works by creating friction that makes the ink disappear, leaving no residue, smudging, or paper damage under normal use.

This pen features a 0.7mm tip, which is considered a medium point size, suitable for general writing.

Ensure the refill is properly seated. Check if the pen has been exposed to high heat, which could temporarily make the ink invisible. Try writing on a different type of paper. If the issue persists, replace the ink refill.

The eraser tip may be worn down. Try using a fresh eraser tip by exposing more of it. If the ink has set for a long time or on certain paper types, it might be harder to erase completely. Ensure you are using friction from the eraser stud.

The pen has likely been exposed to temperatures above 140°F (60°C). Store the pen in a cool environment. The ink should reappear when the paper is cooled to below 14°F (-10°C), but this is not guaranteed for all situations.

Ensure the barrel is screwed on tightly. Avoid storing the pen tip-down for extended periods, especially in warm conditions. If leakage occurred, clean the pen body with a damp cloth.