Makita DUM111Z Cordless Garden Pruner Hedge Cutter Grass Shear + Handle

Yes, the Makita DUM111Z is a cordless tool powered by Makita's 18V LXT Lithium-Ion battery system. Please note that batteries and a charger are sold separately.

The DUM111Z is typically supplied as a bare tool, meaning it includes the main unit, a blade cover, and the hedge trimmer attachment. Batteries, charger, and optional accessories like the long-handled lance are sold separately.

The tool features a tool-less blade change system. Simply release the current blade and attach the desired one (grass shear or hedge trimmer) securely until it clicks into place. Always ensure the tool is switched off and the battery is removed before changing blades.

The DUM111Z is best suited for light trimming, shaping small to medium hedges, and precision work. For very dense hedges or branches thicker than approximately 8mm, a dedicated hedge trimmer with larger blades and higher power may be more appropriate.

The optional long-handled lance allows you to use the grass shear attachment in an upright position. This is beneficial for reducing bending and reaching awkward areas like under low bushes or along fences, improving user comfort and ergonomics.

After use, clean the blades with a dry or slightly damp cloth. Periodically lubricate them with light machine oil to prevent rust and ensure smooth cutting. Store the blades with the protective cover on.

While the tool accepts all Makita 18V LXT batteries, using a higher capacity battery (e.g., 3.0Ah or 4.0Ah and above) will provide longer runtimes between charges, allowing for more extensive garden work.

Ensure a fully charged Makita 18V LXT battery is correctly inserted. Check that the lock-off button and trigger are being pressed simultaneously. Verify the battery protection circuit has not been activated; remove and reinsert the battery. If the issue persists, check the battery contacts for dirt or damage.

Check if the blades are dull or damaged; sharpen or replace them if necessary. Ensure the correct blade for the task (grass shear or hedge trimmer) is installed. Verify that the cutting height is set appropriately and that there are no obstructions in the cutting path. Clean any grass or debris buildup from the blades and mechanism.

Ensure you are following the correct tool-less blade change procedure for your model. Sometimes minor debris can obstruct the mechanism; clean the area around the blade mounting before attempting to change it. Refer to the specific instructions in the product manual.

Ensure the battery is fully charged. The battery protection circuit may be activating due to overload or high temperature; allow the tool and battery to cool down. Consider using a higher capacity LXT battery if available. Overgrowth or excessively thick material can strain the motor and battery.