Best current price£24.46from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£24.46Visit shop Soho Lighting White Usb Charger 2 Gang Em-Euro Module
Visit shop1 offer from £24.46
View price history by clicking the chart icon.
This Soho Lighting White USB Charger 2 Gang EM-Euro Module (model SS-SH-05-EMD401-WT) is designed for users looking to create custom-built wall plates with integrated USB charging capabilities. Its key benefit is providing two convenient 2000mA USB charging sockets within a modular Euro plate system, allowing for a clean and versatile setup. A caveat to note is its specific compatibility with EM Floor and Wall Plates from the Soho Lighting range, excluding other plate types.
| Model Part Number | SS-SH-05-EMD401-WT |
|---|---|
| Brand | Soho Lighting |
Each USB port provides a maximum current of 2000mA (2 Amps).
No, this module is specifically designed for Soho Lighting's EM-Euro Module compatible plates (EM Floor and Wall Plates). It is not compatible with RM, CM, LT1, LT2, or LT3 plate systems.
Wipe the module with a soft, dry cloth. If necessary, use a slightly damp cloth, but avoid excessive moisture and never use harsh chemical cleaners.
Yes, this is one of the primary benefits. You can combine it with other compatible Euro modules such as CAT 5/6, BT, Satellite, or HDMI to create a custom-configured plate.
The module dimensions are 50mm x 50mm.
While the module snaps into the plate easily, electrical connections should be made by a qualified electrician to ensure safety and compliance with regulations.
Verify that the module is correctly installed and wired into the power supply. Check that the connected devices do not exceed the total 2000mA output per port or the combined output if both are in use. Ensure the Soho Lighting plate is compatible.
Confirm that you are using a Soho Lighting EM Floor or Wall Plate with a compatible 50mm x 50mm slot. This module is not compatible with other plate types (RM, CM, LT series).
Ensure that the power source connected to the module can supply the required amperage. Try charging a single device to check if the issue persists when only one port is in use.
Setup: This module is designed to snap into compatible Soho Lighting EM Floor and Wall Plates. Ensure the plate has a vacant 50mm x 50mm slot designated for an EM-Euro Module. Gently push the module into the slot until it clicks into place. Connect the appropriate wiring as per standard electrical installation guidelines (professional installation recommended).
Compatibility: This EM-Euro Module is only compatible with Soho Lighting's EM Floor and Wall Plates. It is explicitly not compatible with RM, CM, (RM+CM), LT1, LT2, or LT3 Plates. Always verify the plate type before attempting installation.
Care: Clean the module with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the unit is powered off before cleaning.
