WOCA Invisible Primer - 2.5 Litre
Best current price£80.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£80.00Visit shop B&Q - Woca Invisible Primer2.5 Litre
Visit shopB&Q£80.00Visit shop One Offer
1 offer from £80.00
View price history by clicking the chart icon.
Product Information
Full details
The WOCA Invisible Primer (2.5L) is designed for professionals and DIY enthusiasts seeking to prepare untreated or newly sanded indoor wooden surfaces for an invisible oil finish. Its key benefit is creating an optimal base for subsequent Invisible Oil application, ensuring a natural look. A potential caveat is its specific use as a primer, requiring an additional oil treatment for full protection.
All features
| Brand | WOCA |
|---|
Extended Product Information
FAQs
Can I use WOCA Invisible Primer on pre-finished wood?
No, the primer is designed for untreated or newly sanded wooden surfaces to ensure proper adhesion and penetration for the invisible oil finish.
What is the drying time for WOCA Invisible Primer?
The primer typically dries within 30-60 minutes, but always allow it to dry completely before applying the WOCA Invisible Oil.
How do I clean up after using the primer?
Since it's a water-based formula, you can clean your tools and applicators with soap and water immediately after use.
What happens if I don't use a primer before Invisible Oil?
Skipping the primer may result in uneven absorption of the oil, leading to blotchiness and an inconsistent appearance, especially on highly absorbent woods.
Can I use this primer for exterior wood applications?
No, WOCA Invisible Primer is specifically formulated for indoor wooden surfaces only.
Is this product available in other sizes?
Yes, WOCA Invisible Primer is also available in a 1L size.
Do I need to sand after applying the primer?
A light sanding with fine-grit sandpaper (220-320 grit) is recommended if any wood grain has raised during the priming process. This ensures a smooth surface for the oil application.
Troubleshooting
Uneven absorption or blotchiness after oil application
Ensure the wood was properly prepared (clean, dry, newly sanded) and that the primer was applied evenly. A light sanding after priming might be necessary if grain has raised significantly.
Primer seems too thick or difficult to apply
Stir the product thoroughly. Ensure it has not been exposed to extreme temperatures during storage. Apply thinly; it is not meant to form a thick film.
Wood still looks 'wet' or darkened after primer application
This is usually temporary as the water-based primer penetrates. Ensure it dries completely as per instructions before applying the final oil. Proper drying is key to the 'invisible' effect.
Pros and Cons
Pros
- Prepares wood effectively for WOCA Invisible Oil.
- Water-based formula makes application and cleanup simpler.
- Helps achieve a natural, untreated look on wood.
- Designed for optimal adhesion of the final oil coat.
Cons
- Requires a subsequent oil treatment for complete protection.
- Only compatible with WOCA Invisible Oil.
- Not suitable for exterior use.
- Best results achieved on untreated or newly sanded surfaces.
Setup, Compatibility & Care
Setup:
- Ensure the wooden surface is clean, dry, and free from dust, grease, and old finishes. For best results, the surface should be newly sanded.
- Stir the primer thoroughly before application.
- Apply a thin, even coat using a suitable applicator, such as a WOCA applicator or a brush.
- Allow the primer to dry completely according to the manufacturer's instructions (typically 30-60 minutes).
- Sand lightly with fine-grit sandpaper (e.g., 220-320 grit) if necessary to remove any raised grain.
- Apply WOCA Invisible Oil once the primer is fully dry.
Compatibility:
- Primarily designed for use with WOCA Invisible Oil on untreated or newly sanded indoor wood surfaces.
- Not recommended for use with other finishing oils or varnishes.
- Suitable for most common wood types found indoors.
Care:
- Store the product in a cool, dry place, away from direct sunlight and frost.
- Keep the container tightly sealed when not in use.
- Clean tools and applicators immediately after use with water.