VMS Varnish HD XXL Satin 100ml - AX15S
Best current price£14.45from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£14.45Visit shop VMS Varnish HD XXL Satin 100ml AX15S
Visit shopeBay£14.45Visit shop All Offers
3 offers from £14.45 - £15.95
View price history by clicking the chart icon.
VMS Varnish HD XXL Satin 100ml - AX15SFree delivery in 1–3 days£14.84Visit shop →
OnBuy.comVms Varnish Hd Xxl Satin 100Ml Ax15s 5904326981065
Free delivery in 1–3 days
£15.95
Visit shop
Product Information
Full details
This guide is for modelers looking to protect their work with a high-quality varnish. VMS Varnish HD XXL Satin offers a durable, even finish, repelling particles and enhancing the final look of your models. However, it's crucial to avoid freezing temperatures during storage and use.
All features
| Model Part Number | AX15S |
|---|---|
| Brand | VMS |
Extended Product Information
FAQs
What is the recommended application distance?
Hold the spray can approximately 15-20 cm from the surface when applying.
Can I use this varnish on different types of models?
Yes, VMS Varnish HD XXL Satin is suitable for various scale models and miniatures.
How should I store the varnish?
Store and handle the product at room temperature, away from direct sunlight and heat sources. Ensure it is not exposed to freezing temperatures.
What should I do if the nozzle clogs?
Clean the nozzle with an appropriate solvent or a needle to remove any dried varnish.
How many coats of varnish should I apply?
Apply thin, even coats, allowing each coat to dry completely before applying the next. Typically, 2-3 coats are sufficient.
Is this varnish compatible with all paints?
VMS Varnish HD XXL Satin is compatible with most acrylic and enamel paints. Always test on a small, inconspicuous area first.
How long does it take for the varnish to dry?
Drying time depends on environmental conditions. Allow at least 30-60 minutes between coats and several hours for complete curing.
Troubleshooting
Varnish is not spraying evenly.
Check the nozzle for clogs and clean it with appropriate solvent. Ensure the can is shaken well before use.
Varnish appears cloudy or white.
Ensure the varnish has not been exposed to freezing temperatures. Apply in thin coats, avoiding excessive build-up.
The varnish is not drying properly.
Check the room temperature and humidity. Ensure adequate ventilation. Apply thin coats and allow sufficient drying time.
Pros and Cons
Pros
- Easy to apply, saving time and effort.
- Provides a clear, non-whitening finish.
- Offers excellent protection for your models.
- Repels particles, ensuring a cleaner finish.
Cons
- Susceptible to low temperatures; must be protected from freezing.
- Requires proper ventilation during application.
Setup, Compatibility & Care
- Preparation: Ensure the model is clean and free of dust or debris.
- Application: Shake the VMS Varnish HD XXL Satin well before use. Apply in thin, even coats, holding the spray can approximately 15-20 cm from the surface.
- Drying: Allow each coat to dry completely before applying additional coats or handling the model. Drying time may vary depending on environmental conditions.
- Compatibility: This varnish is compatible with most acrylic and enamel paints.
- Care: Store and handle the product at room temperature. Avoid exposure to freezing temperatures, as this can damage the varnish. Clean the nozzle after each use to prevent clogging.