Morphy Richards Steam Flow Iron - 2400W

Open the water inlet and fill the tank with clean water up to the maximum level indicated. Ensure the iron is unplugged.

It is recommended to use tap water or distilled water to prevent scale buildup.

Unplug the iron and let it cool down. Wipe the soleplate with a damp cloth. Use the self-clean function regularly.

The auto shut-off feature turns off the iron automatically after a period of inactivity for safety.

Hang the garment and hold the iron vertically, close to the fabric, and press the steam button.

Make sure the temperature setting is correct for the fabric. Ensure the iron has reached the correct temperature before using the steam function.

Use the self-clean function as per the instructions in the user manual, or use a descaling solution.

The ceramic soleplate is designed to be scratch-resistant, but it's important to avoid ironing over zippers or buttons to prevent any damage.

Check if the water tank has water. Make sure the steam setting is selected and the iron has reached the correct temperature. Descale the iron if necessary.

Ensure the temperature setting is appropriate for the fabric. The iron may be set too low. Let the iron heat up fully before using steam. The anti-drip feature might be working.

Check the power cord and outlet. Ensure the iron is plugged in correctly. If the iron still doesn't heat, it may require professional servicing.

Use the self-clean function regularly. Consider using distilled water to prevent scale formation.

Descale the iron. Make sure the water tank is full enough. Ensure that the soleplate is clean and not blocked.