Joint it Simple - Grey
Best current price£57.30from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£57.30Visit shop B&Q - Joint-It Simple Grouting Compound 20KgBlack
Visit shopB&Q£57.30Visit shop All Offers
2 offers from £57.30 - £57.57
View price history by clicking the chart icon.
B&Q - Joint-It Simple Grouting Compound 20KgGreyFree delivery in 1–3 days£57.57Visit shop →
Product Information
Full details
This guide is for homeowners and contractors seeking an easy-to-use, low-maintenance solution for patio jointing. Joint-It Simple provides a professional finish that prevents weed growth and cracking, setting rock hard for lasting results. However, remember that power washing should be avoided for the first 30 days after application. Joint-It Simple is a ready-to-use jointing compound designed for both professionals and DIY enthusiasts, offering a durable and aesthetically pleasing finish for patios and paved areas.
All features
| Brand | Joint it Simple |
|---|
Extended Product Information
FAQs
How long does Joint-It Simple take to set?
Joint-It Simple typically sets in approximately 4 hours at 20°C. The setting time can vary depending on the temperature and humidity.
What surfaces is Joint-It Simple suitable for?
It is suitable for porcelain, concrete paving slabs, and natural stone.
How much area does a 20kg tub cover?
A 20kg tub yields approximately 30m2 for 450x450mm paving units with a 3mm joint width and 25mm depth.
Can Joint-It Simple be applied in wet weather?
Yes, Joint-It Simple can be applied in wet or dry weather.
How do I store leftover compound?
Leftover compound can be stored underwater in its bucket for up to 12 weeks.
Is Joint-It Simple water permeable?
Yes, Joint-It Simple is water permeable, allowing water to drain.
Can I use a power washer on the joints?
It is advised to avoid power washing for at least 30 days after installation.
What is the minimum joint width and depth required?
The joints should have a minimum width of 3mm and a depth of 25mm.
Troubleshooting
Compound not setting properly.
Ensure joints meet the minimum width and depth requirements. Check the temperature and humidity levels; lower temperatures will slow setting time. Make sure the product is not expired.
Excess compound remains on the paving surface after setting.
Use a soft brush to gently remove any excess compound. Avoid harsh scrubbing that could damage the joints.
Weeds growing in the joints.
Ensure the compound was properly applied, filling the joints completely. If weed growth persists, consider spot-treating with a weed killer, but avoid direct contact with the jointing compound.
Pros and Cons
Pros
- Easy to apply, saving time and effort.
- Provides a long-lasting, professional finish.
- Resistant to weeds, preventing unwanted growth.
- Suitable for various paving materials.
- Can be stored underwater for up to 12 weeks.
- Water-permeable, promoting drainage.
Cons
- Requires joints to be at least 3mm wide and 25mm deep.
- Power washing should be avoided for the first 30 days after installation.
- Setting time varies depending on the climate (4 hours at 20°C).
- May require more product for larger joint widths.
Setup, Compatibility & Care
- Preparation: Ensure joints are clean and free of debris. Joints should be a minimum of 3mm wide and 25mm deep.
- Application: Apply the compound with a hard brush, working it into the joints. Use a soft brush to remove excess compound from the paving surface.
- Water: Lightly mist the surface with water to help the compound settle.
- Setting Time: Allow approximately 4 hours at 20°C for the compound to set. This time may vary depending on the temperature.
- Compatibility: Joint-It Simple is compatible with porcelain, concrete paving slabs, and natural stone.
- Care: Avoid power washing for at least 30 days after installation. Regular sweeping is recommended to keep the surface clean.
- Storage: Leftover compound can be stored underwater in its bucket for up to 12 weeks.