The Primaflow 22mm lockshield stopcock is a reliable solution for controlling water flow in plumbi...The Primaflow 22mm lockshield stopcock is a reliable solution for controlling water flow in plumbing systems. Designed to shut off the water supply, this component is essential for isolating incoming mains or specific branches, allowing for maintenance or repairs without the need to drain the entire system. It features compression ends that ensure a secure and watertight connection using a standard nut and olive. Built for durability and performance, this stopcock is an essential tool for professional plumbing applications.
The Primaflow 22mm Lockshield Stopcock is designed for professional plumbers and DIYers who need a reliable method to isolate water flow within a 22mm plumbing system. Its primary benefit is the ability to shut off water to specific branches or the main supply for repairs, preventing the need to drain an entire system. A key caveat is that the 'lockshield' design requires a specific tool to operate, making it unsuitable for quick, emergency manual shut-offs where a standard handle valve might be preferred.
All features
Model Part Number
10045287
Brand
Primaflow
Extended Product Information
FAQs
Does this include the lockshield key?
The key is typically sold separately. Check your packaging, but be prepared to have a standard lockshield key on hand.
Can I use this on plastic pipe?
Yes, but you must ensure that a suitable pipe insert is used to maintain the integrity of the compression joint.
Is this suitable for central heating systems?
Yes, it is suitable for isolating branches in central heating systems where 22mm pipe is installed.
What is the benefit of a lockshield over a ball valve?
The lockshield is more secure because it cannot be turned by hand, which is useful in preventing accidental water shut-off.
Can this be installed vertically or horizontally?
Yes, it can be installed in any orientation provided there is enough space to access the compression nuts and the center valve.
Troubleshooting
Joint is leaking immediately after installation
Check that the olive is seated correctly and tighten the nut further using a spanner. Ensure the pipe was not scratched during cutting.
Valve is difficult to turn with the key
Do not force the valve. Check for debris in the mechanism or ensure you are using the correct sized lockshield key.
Pros and Cons
Pros
Prevents accidental shut-offs or tampering due to the lockshield design
Easy to install using standard compression tools
Enables localized plumbing repairs without system-wide draining
High-quality construction ensures longevity
Cons
Requires a lockshield key for operation
Not intended for quick, hands-only emergency shut-off
Limited to 22mm pipe compatibility only
Setup, Compatibility & Care
Preparation: Ensure the water supply is isolated before installation. Cut the 22mm pipe square and remove any burrs.
Installation: Slide the compression nut and olive onto the pipe. Insert the pipe into the stopcock body and tighten the nut manually before finishing with a spanner.
Compatibility: Only use with 22mm copper or compatible plastic pipework (ensure inserts are used for plastic).
Maintenance: Periodically check the joints for signs of moisture. If a leak occurs, tighten the compression nut by a quarter turn. Avoid using abrasive chemicals when cleaning the exterior; a damp cloth is sufficient to keep the valve in good working order.