Ryobi Chainsaw Chain - RAC262 - 35cm
Best current price£19.99from Ryobi
Best offers
Shopping.co.uk recommended and popular offers
Ryobi£19.99Visit shop Ryobi 35Cm Chainsaw Chain For Ry36csx35a-0 (Single)
Visit shopRyobi£19.99Visit shop All Offers
2 offers from £19.99 - £25.20
View price history by clicking the chart icon.
RyobiRyobi 35Cm Chainsaw Chain For Ry36csx35a-0 (Single)
Free delivery in 1–3 days
£19.99
Visit shop
OnBuy.comRyobi Rac262 35Cm Chainsaw Chain For Ry36csx35a-0
Free delivery in 1–3 days
£25.20
Visit shop
Product Information
Full details
This guide is for owners of the Ryobi RY36CSX35A-0 Cordless 35cm Chainsaw who need a reliable replacement chain. The RAC262 offers a precise 35cm cut with specific pitch, gauge, and link count for optimal performance. A key caveat is its compatibility; it's designed exclusively for the RY36CSX35A-0 model, so ensure your saw matches before purchase.
All features
| Model Part Number | 5132004773 |
|---|---|
| Brand | Ryobi |
Extended Product Information
FAQs
What chainsaw model is the RAC262 chain compatible with?
The RAC262 chain is specifically designed for the Ryobi RY36CSX35A-0 Cordless 35cm Chainsaw.
What are the key specifications of the RAC262 chain?
It features a 35cm bar length compatibility, 9.53mm chain pitch, 1.27mm gauge, and has 52 links.
How often should I sharpen the chainsaw chain?
Sharpen the chain when you notice a decrease in cutting performance, or if the chips produced are very fine dust instead of coarse sawdust. This depends heavily on usage and the material being cut.
How do I check the chain tension?
Gently pull the chain away from the underside of the guide bar. It should move freely around the bar, but not sag noticeably. It should return flush against the bar when released.
What happens if the chain is too loose?
A loose chain can increase wear on the chain and bar, and it can also derail from the guide bar, which is a safety hazard.
What happens if the chain is too tight?
A chain that is too tight creates excessive friction and heat, leading to premature wear on the chain, guide bar, and internal chainsaw components.
Can I use this chain on a different brand of chainsaw?
No, this chain is designed and specified only for the Ryobi RY36CSX35A-0 Cordless 35cm Chainsaw. Using it on incompatible saws can lead to poor performance, damage, or safety risks.
Troubleshooting
Chain won't stay tensioned
Ensure the bar nuts are fully tightened. Check for wear on the guide bar or sprocket. Re-adjust tension carefully.
Chain is cutting poorly or "jumping"
The chain may be dull. Sharpen the cutters. Ensure the chain is properly tensioned and not excessively worn. Check for bent or damaged cutters.
Chain is difficult to rotate by hand
The chain is likely too tight. Loosen the tension slightly until it rotates freely but without significant sag.
Chain derails from the bar
The chain is likely too loose or the guide bar is worn. Re-tension the chain and inspect the guide bar for damage or wear. Ensure the chain was installed in the correct orientation.
Pros and Cons
Pros
- Ensures optimal fit and performance with the specified Ryobi chainsaw model.
- Designed for efficient and clean cuts.
- Durable construction for longevity.
Cons
- Only compatible with the Ryobi RY36CSX35A-0 chainsaw.
- Requires user to verify compatibility before purchase.
- Wear and tear is inevitable with chainsaw chains.
Setup, Compatibility & Care Instructions
Compatibility: This RAC262 chain is exclusively designed for the Ryobi RY36CSX35A-0 Cordless 35cm Chainsaw. Always confirm your chainsaw model before attempting to install this chain.
Setup:
- Ensure the chainsaw is turned off and the battery is removed.
- Release the chain tensioner on your Ryobi RY36CSX35A-0.
- Remove the bar nuts and the side cover.
- Remove the old chain, paying attention to its direction.
- Place the new RAC262 chain onto the guide bar, ensuring the drive links fit into the bar groove and the cutters are facing the correct direction (typically forward, away from the handle).
- Replace the side cover and bar nuts, but do not fully tighten them yet.
- Adjust the chain tension using the chainsaw's tensioning mechanism until the chain is snug but still can be pulled around the bar by hand. It should not sag significantly but also should not bind.
- Fully tighten the bar nuts.
- Re-check chain tension after a few minutes of use and adjust if necessary.
Care:
- Sharpening: Regularly inspect the chain for dullness. Sharpen the cutters with a file and guide at the correct angle (refer to your chainsaw's manual for specific angles) when necessary to maintain cutting efficiency.
- Tensioning: Check and adjust chain tension frequently, especially during initial use and after the chain has heated up. A chain that is too loose can derail; too tight can cause excessive wear.
- Lubrication: Ensure the chainsaw's automatic oiling system is functioning correctly and the oil reservoir is full. Proper lubrication reduces friction and heat, extending chain and bar life.
- Cleaning: After use, clean debris from the chain, bar, and sprocket area.