GeZu Impex Swivel Coupler - 48 x 60 mm Hot Dip Galvanised - Set Of 4

A swivel scaffolding clamp is used to connect two scaffolding tubes at a free angle, allowing for flexible and adaptable scaffolding configurations, especially useful for diagonal bracing or complex structures.

This clamp is designed for scaffolding tubes with an outer diameter of 48 mm (4.83 cm).

The clamp is made of hot-dip galvanized steel for durability and corrosion resistance. The T-bolt and collar nut are made of yellow galvanized steel.

Yes, all couplings are produced in accordance with EN 74 and are labelled with the corresponding test mark.

A 22mm spanner is required to tighten the collar nut.

While primarily designed for swivel (free angle) connections, it can be used for right-angle connections if positioned accordingly, but a dedicated right-angle coupler might be more efficient for that specific purpose.

Keep the clamp clean and dry. Periodically inspect for damage or corrosion and ensure the T-bolt and nut threads are clean for proper tightening.

Ensure the scaffolding tube has a 48mm outer diameter, as this clamp is specifically designed for this size.

Check for debris or rust on the T-bolt threads and inside the collar nut. Clean threads and try again. Ensure the correct 22mm spanner is used.

Verify that the collar nut is tightened sufficiently with the appropriate spanner. Re-tighten securely. Inspect the T-bolt and clamp for any signs of damage that might prevent a tight fit.