Best current price£14.30from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£14.30Visit shop Motion Sensor 5.8Ghz Microwave Hf Radar With Day Night Sensor Range 6 M For Led Up To 400 W 4260608587419
Visit shop1 offer from £14.30
View price history by clicking the chart icon.
This illuburg MS30 motion sensor is designed for automated lighting control, particularly with LED fixtures up to 400W. Its key benefit is reliable motion detection for enhanced convenience and energy saving. A primary caveat is that it is not dimmable. Features include a 5.8 GHz microwave sensor, adjustable detection range and sensitivity, an integrated daylight sensor, and adjustable switch-on times.
| Model Part Number | MS30 |
|---|---|
| Brand | illuburg |
The illuburg MS30 motion sensor is designed to control LED lighting loads up to 400W.
No, this motion sensor is not dimmable and is only suitable for on/off switching of lights.
The sensor has a detection range of up to 6 meters and a detection angle of 150°.
The built-in daylight sensor can be adjusted to 2 lux, 10 lux, 25 lux, 50 lux, or deactivated via its settings.
The switch-on time for the connected light can be adjusted from 5 seconds to 30 minutes.
The sensor operates within an ambient temperature range of -25 to 60 °C.
The device has an IP20 protection class, indicating it is suitable for dry indoor environments only.
The sensor boasts a service life of over 50,000 hours.
Verify power supply to the sensor and connected light. Check that the sensitivity and lux settings are appropriate for the current conditions. Ensure the detected object is within the 6-meter range and 150° angle.
Check if motion is still being detected. Adjust the switch-on time to a shorter duration if necessary. Ensure the lux setting is not too high, which might prevent it from turning off if ambient light is low.
Adjust the sensitivity level to reduce false triggers from minor movements or environmental factors. Ensure the sensor is not mounted near heat sources or air vents that could cause fluctuations.
Microwave sensors can have limited penetration through materials. Ensure the sensor has a direct line of sight to the detection area for optimal performance.
Setup: The MS30 connects via spring terminals. Ensure power is disconnected before wiring. Connect the live and neutral wires to the appropriate terminals and the switched live wire to the output terminal. Mount the sensor in a suitable location, ensuring its detection field is unobstructed.
Compatibility: This sensor is designed for use with LED lighting loads up to 400W. It is not suitable for dimmable lighting systems. It is rated IP20, meaning it is protected against solid objects larger than 12.5mm but offers no protection against water; therefore, it should only be installed in dry indoor locations.
Care: The exterior of the sensor can be cleaned with a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents. Ensure the sensor's detection window remains clear of dust and obstructions for optimal performance.
