* Air spring mechanism * Brushless motor accelerates the compression of the air spring * Drives na...* Air spring mechanism * Brushless motor accelerates the compression of the air spring * Drives nails up to 90mm * Powered by an 18V LXT Li-Ion battery (not included) Makita DBN900ZK 18V Brushless Framing Nailer Body Only in Blue
The Makita DBN900 LXT Framing Nailer has an air spring mechanism. The brushless motor accelerates the compression of the air spring, allowing nails up to 90mm to be driven with a sense similar to that of a pneumatic nailer. Supplied as a bare unit, NO battery or charger. Specifications: Nail Length: 50 - 90mm Nail Diameter: 2.9 - 3.3mm Fastener Magazine Capacity: 51 - 58 Magazine Angle: 30 - 34 Weight: 4.6kg without battery
This guide is for users of the Makita DBN900ZK 18V Brushless Framing Nailer. It helps you understand the features, setup, and maintenance of the nailer. The key benefit is its powerful performance due to the air spring mechanism and brushless motor. Keep in mind that this model is a bare unit and does not include a battery or charger.
All features
Model Part Number
DBN900ZK
Brand
Makita
Extended Product Information
FAQs
What type of battery does the DBN900ZK use?
It uses an 18V LXT Li-Ion battery, which is sold separately.
What nail sizes can the nailer handle?
It can handle nails from 50mm to 90mm in length and 2.9 to 3.3mm in diameter.
How do I load nails into the nailer?
Open the magazine and insert the nails, ensuring they are properly aligned.
How should I clean the nailer?
Wipe it down with a clean, dry cloth after each use. Regularly clean the magazine and nose.
What should I do if the nailer jams?
Unplug the battery, clear the jammed nails, and ensure that you are using the correct nail size.
Is a charger included?
No, the DBN900ZK is a bare tool, so the charger must be purchased separately.
What is the weight of the nailer?
The nailer weighs 4.6kg without the battery.
Troubleshooting
Nailer not firing.
Check the battery charge level. Ensure the nailer is properly seated against the workpiece. Inspect the nailer for jams.
Nails not being driven deep enough.
Adjust the depth setting on the nailer. Check the battery charge. Ensure you are using the correct nail size and type.
Nails jamming in the magazine.
Use only nails that are within the recommended size range. Clean the magazine to remove debris.
Pros and Cons
Pros
Brushless motor for increased efficiency and longer tool life.
Air spring mechanism provides powerful and consistent nailing.
Compatible with a range of nail sizes for different applications.
Cordless design enhances portability and convenience.
Ergonomic design for comfortable use over extended periods.
Cons
Requires separate purchase of battery and charger.
Weight of 4.6kg (without battery) may cause fatigue during prolonged use.
Magazine capacity may require frequent reloading in high-volume applications.
Nail diameter limited to 2.9 - 3.3mm.
Setup, Compatibility & Care
Battery Compatibility: Use only 18V LXT Li-Ion batteries with the Makita DBN900ZK. Ensure the battery is fully charged before use.
Nail Loading: Load nails into the magazine, ensuring they are properly aligned. The magazine can hold between 51 and 58 nails, depending on the fastener.
Safety Check: Before each use, inspect the nailer for any damage.
Cleaning: Keep the nailer clean by wiping it down after each use. Remove any debris from the magazine and nose.
Storage: Store the nailer in a dry place away from extreme temperatures and direct sunlight.
Maintenance: Regularly inspect the nailer for wear and tear. If any parts are damaged or worn, replace them promptly.