Best current price£9.48from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.48Visit shop B&Q - E6013 Mild Steel Rutile-Cellulosic Arc Welding Electrodes 2.0mm X 300mm ( Pack Of: 4 )
Visit shop1 offer from £9.48
View price history by clicking the chart icon.
Designed for hobbyists and professional fabricators alike, the DIYUK E6013 mild steel arc welding electrodes are the ideal general-purpose consumable for manual metal arc (MMA) welding on low-carbon structural and fabrication steels. Their rutile-cellulosic coating offers exceptional arc stability and easy striking, making them perfect for both beginner learning and short, precise repair jobs. However, users should note that while they are highly versatile, they are best suited for thinner materials under 5mm and may not provide the deep, structural penetration required for heavy-duty industrial pipe welding or thick plate joining.
| Model Part Number | E6013 |
|---|---|
| Brand | DIYUK |
No, these are specifically designed for mild and low-carbon structural steels and will not provide the required metallurgical properties for stainless steel welding.
While it depends on your specific machine, 2.0mm E6013 electrodes typically run best between 40 and 70 amps.
The E6013 is known for its self-releasing slag, but you should still use a wire brush to clean the weld surface thoroughly before painting or applying a finish.
No, these are general-purpose electrodes for light fabrication; structural load-bearing welds usually require specific low-hydrogen electrodes (like E7018).
Yes, the E6013 is highly versatile and capable of all-position welding, including vertical-down.
Check your grounding clamp connection and ensure the workpiece is free from thick, non-conductive paint or deep rust at the contact point.
Lower your amperage slightly or check if the electrode has absorbed moisture; switch to a fresh, dry electrode from a sealed pack.
Maintain a consistent, tighter arc length and ensure you are not moving the electrode too quickly across the joint.
To ensure the best results with your DIYUK E6013 electrodes, ensure your welding machine is set to the manufacturer's recommended amperage range for 2.0mm rods. These electrodes are compatible with both AC and DC machines (DCEP or DCEN).
Care instructions are vital for performance: store your electrodes in a cool, dry environment. If the flux coating becomes damp, the arc may become erratic and spatter will increase. If your electrodes have been exposed to high humidity, consider drying them in a rod oven at a low temperature before use to restore optimal welding characteristics.
