Eheim Compacton 600 Aquarium Pump - 250-600 L/h

Yes, the Eheim CompactON series is designed for reliable use in both freshwater and marine environments.

The maximum pumping height for the CompactON 600 model is 100cm.

The flow rate can be adjusted directly on the pump. Refer to the product manual for specific instructions on using the adjustment mechanism.

This model comes supplied with a 12mm hose adapter. You may need to purchase additional adapters if your tubing is a different size.

Yes, the Eheim CompactON pumps are engineered for continuous duty and reliable operation when properly installed and maintained.

It is recommended to clean the pump's intake and impeller at least once a month, or more frequently if you notice a reduction in flow rate or increased noise.

The dimensions are approximately 38mm x 72mm x 62mm (width x depth x height).

Ensure the power cord is securely plugged into a working outlet. Check that the pump is fully submerged in water. Verify that the impeller is not blocked by debris.

Clean the pump's intake screen and impeller housing. Check the connected hose for any kinks or blockages. Ensure the flow rate adjustment is set correctly.

Turn off and unplug the pump. Check the impeller for any debris or damage. Ensure the pump is securely attached and not vibrating against aquarium surfaces. The ceramic bearings are designed for quiet operation; excessive noise may indicate an issue with the impeller or bearing.

Verify that the pump is not overheating. Ensure adequate water flow through the pump to keep it cool. Check for any electrical issues with the power source.