Hycote Colour Touch Up Brush Paint - Black - 12.5ml

The surface must be clean, dry, and free from contaminants such as grease, wax, or dirt. For best results, lightly abrade the area to be painted if it is smooth or glossy.

Hycote Touch Up Colour Brush paints are fast-drying. While drying times can vary based on temperature and humidity, typically it will be touch-dry within minutes and fully hardened within a few hours.

Yes, this paint is suitable for use on plastics, as well as metals, wood, and ceramics.

Keep the cap on tightly to ensure an airtight seal. Store the can in a cool, dry place away from direct sunlight and heat sources.

It is generally recommended to apply thin, even coats. Allow each coat to dry sufficiently before applying the next to achieve the best finish and avoid runs or drips.

This product is specifically designed for small touch-ups like scratches and stone chips. For larger areas, a spray can or professional application may be more appropriate.

It means the paint's colour has been precisely analyzed and formulated by Hycote's technical team to replicate the original manufacturer's paint code for specific vehicle models.

Ensure the can was shaken properly and sufficiently. Check if the nozzle is blocked; if so, clean with a suitable solvent. If the paint has dried in the brush, it may need to be replaced.

The surface may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants like oil or wax. Light abrasion of the repair area before application can improve adhesion.

Apply thin, even coats rather than one thick layer. Allow each coat to dry slightly before applying the next. Practice on a scrap surface to get a feel for the brush and paint consistency.

Verify you have the correct product code for your vehicle's paint. Ensure the paint has been thoroughly mixed. Note that minor variations can occur due to age and fading of the original paintwork.