Sievert Pro 86/88 Cyclone Burner - 19mm - 3.1kw - Multicolor
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professional plumbers and tradespeople needing a powerful and efficient burner for pipe soldering and brazing. The Sievert Pro 86/88 Cyclone Burner offers a unique swirling flame for rapid heating, enabling soldering of pipes up to 50mm and brazing of pipes up to 18mm. A key consideration is its direct connection requirement to specific Sievert handles (PRMS3486 and PRMS3488), limiting its immediate use without compatible equipment.
All features
| Age Group | adult |
|---|---|
| Colour | Multicolor |
| Gender | Unisex |
| Model Part Number | PRMS3486 |
| Brand | Sievert |
Extended Product Information
FAQs
What is the maximum pipe size this burner can solder?
The Sievert Pro 86/88 Cyclone Burner is effective for soldering copper pipes up to 50mm in diameter.
Can this burner be used for brazing?
Yes, it is suitable for brazing copper pipes up to 18mm in diameter.
What handles are compatible with this burner?
This burner is designed for direct connection to Sievert PRMS3486 and PRMS3488 handles.
What type of gas should I use?
The burner is designed to be used with propane or MAPP gas mixtures typically found in Sievert gas cartridges, when connected via a compatible handle.
How do I clean the burner head?
Allow the burner to cool completely. If the head appears dirty or obstructed, gently clean it with a soft brush. Avoid using abrasive materials that could damage the burner.
Is this burner suitable for DIY use?
While powerful, its design and specific handle requirement make it best suited for professional tradespeople. For occasional, light-duty tasks, other burner types might be more appropriate.
Does the burner come with a gas cylinder?
No, the burner is sold separately and requires a compatible Sievert handle and gas cylinder or cartridge for operation.
Troubleshooting
Burner will not ignite
Ensure the gas cylinder is properly connected and the valve is open. Check that the burner head is not blocked. Verify compatibility with the connected handle and gas type.
Flame is weak or inconsistent
Check gas pressure and flow rate. Ensure the gas cylinder is not empty. Clean the burner nozzle if it appears dirty or obstructed. Verify connection to the handle is secure.
Uneven heating of pipe
Ensure the burner is held at the correct distance and angle relative to the pipe. Move the burner in a consistent pattern to distribute heat evenly. Check for any solder flux or debris obstructing the flame.
Handle not connecting securely to burner
Ensure both the burner neck tube and the handle's connection port are clean and free of obstructions. Verify you are using a compatible Sievert handle (PRMS3486 or PRMS3488).
Pros and Cons
Pros
- Effective swirling flame for faster heating.
- Capable of soldering larger pipe diameters (up to 50mm).
- Suitable for brazing smaller diameter pipes (up to 18mm).
- Powerful 3.1kW output for efficient work.
- Designed for secure connection to compatible Sievert handles.
Cons
- Requires specific Sievert handles (PRMS3486/PRMS3488) for operation.
- Not suitable for use with general-purpose gas bottles without an adapter and compatible handle.
- Primarily designed for professional use; may be overkill for occasional DIY tasks.
Setup, Compatibility & Care
Setup:
- Ensure the burner is clean and free from debris.
- Connect the burner's neck tube directly to a compatible Sievert handle (PRMS3486 or PRMS3488).
- Attach the compatible handle to a suitable gas cylinder (e.g., Sievert's gas cartridges) following the manufacturer's instructions for secure connection.
- Check all connections for leaks before igniting.
Compatibility:
- Handles: Strictly compatible with Sievert PRMS3486 and PRMS3488 handles.
- Gas: Use with recommended propane or MAPP gas mixtures suitable for Sievert systems.
- Pipes: Suitable for soldering copper pipes up to 50mm and brazing copper pipes up to 18mm.
Care:
- Allow the burner to cool completely before storing.
- Store in a dry, well-ventilated area away from direct sunlight and heat sources.
- Periodically inspect the burner head and neck tube for damage or blockages. Clean gently with a soft brush if necessary.
- Refer to the specific handle's manual for its maintenance requirements.