Black Diamond Equipment Glidelite Mix Fl 135mm Skins
The Glidelite skins are made from a mix of mohair and nylon for effective lightweight durability i...The Glidelite skins are made from a mix of mohair and nylon for effective lightweight durability in the field. Features: Fluro-free DWR coating increases suppleness and durability without increasing weight. New pivoting STS Tails provide 20cm of length adjustment and are field replaceable. Available pre-trimmed for all Helio Carbon Models. Fixed Length Skins available in S, M, L, XL lengths in 110 mm and 135 mm widths with pre-fixed tip and tail attachments. Trim-to-length STS skins available in 110mm and 140mm widths. Ships complete with cheat sheets, skin bag, and new offset skin trimmer. Materials: 65% Mohair 35% Nylon.
The Black Diamond Equipment Glidelite Mix Fl 135mm Skins are designed for backcountry skiers seeking a balance of lightweight performance and durability. Their mohair-nylon blend offers excellent climbing traction and smooth gliding, while the fluro-free DWR coating enhances suppleness without adding weight. A potential caveat is the need for precise trimming for non-Helio Carbon models, as they come pre-trimmed for specific skis.
All features
Material
Nylon
Brand
Black Diamond Equipment
Extended Product Information
FAQs
What is the material composition of the Glidelite Mix Fl skins?
The skins are made from a blend of 65% Mohair and 35% Nylon.
Are these skins suitable for all types of snow conditions?
Yes, the mohair-nylon blend offers good performance across various snow conditions, balancing glide and grip.
How much length adjustment does the STS tail provide?
The new pivoting STS Tails provide up to 20cm of length adjustment.
Do I need to trim these skins if I don't have a Helio Carbon ski?
Yes, if you do not have a Black Diamond Helio Carbon model, you will need to use the trim-to-length versions and cut them to fit your specific skis using the provided trimmer.
What accessories are included with the skins?
The skins ship complete with cheat sheets, a skin bag, and a new offset skin trimmer.
Is the DWR coating environmentally harmful?
No, the DWR coating used is fluro-free, making it more environmentally conscious.
Can the STS tail be replaced if it breaks in the field?
Yes, the new pivoting STS Tails are designed to be field-replaceable.
Troubleshooting
Skins not adhering properly
Ensure the ski base is clean and completely dry. Check the skin adhesive for dirt or debris; clean gently with a damp cloth if needed. Reapply skin wax if the adhesive feels dry.
Excessive snow buildup under skins
Ensure the DWR coating is intact. After use, brush skins thoroughly and allow them to dry completely. Apply a skin wax or treatment to improve glide and reduce sticking.
STS tail attachment not secure
Verify that the STS tail is correctly positioned and adjusted. Ensure there is adequate tension; use the 20cm of adjustability to achieve a snug fit. Check for any damage to the tail piece.
Skins are dragging or not climbing effectively
Check the orientation of the skins; ensure they are applied in the correct direction. Brush the mohair fibers to ensure they are aligned for optimal climbing. Clean any debris from the mohair.
Pros and Cons
Pros
Lightweight construction reduces overall ski touring weight.
Durable blend for extended field use.
Versatile for both climbing and gliding.
Adjustable tail system provides a secure and customizable fit.
Fluro-free treatment is environmentally conscious.
Cons
Requires trimming for skis other than Helio Carbon models.
Mohair blend may require more frequent care than synthetic-only skins.
Pivoting tail mechanism could be a point of failure if damaged.
Specific widths might not match all ski models without trimming.
Setup, Compatibility & Care Instructions
Setup:
Pre-Trimmed Skins: If you have a compatible Helio Carbon model, the pre-trimmed skins can be applied directly. Ensure the ski base is clean and dry before application.
Trim-to-Length Skins: For custom fits, place the skin on the ski base. Use the provided offset skin trimmer to carefully cut along the edges of the ski, ensuring a precise fit. Leave a slight overlap or trim to the exact edge as preferred.
Attachment: Secure the tip attachment to the ski tip and adjust the pivoting STS tail for a snug fit, utilizing the 20cm of adjustability as needed.
Compatibility:
Available in fixed lengths (S, M, L, XL) and trim-to-length versions.
Specific widths are available: 110mm and 135mm. Ensure the width is appropriate for your ski model.
Pre-trimmed options are designed for Black Diamond Helio Carbon models.
Care:
Cleaning: After each use, dry the skins thoroughly away from direct heat. Brush off any remaining snow or ice. Clean the adhesive side gently with a damp cloth if it becomes dirty, and reapply skin wax if necessary.
Storage: Store skins in the provided skin bag, with the adhesive sides facing each other. Avoid storing them in extreme temperatures or in direct sunlight.
Re-gluing: Over time, the adhesive may lose its stickiness. Follow manufacturer instructions for re-applying skin glue or using skin savers.