Best current price£5.79from eBay
Shopping.co.uk recommended and popular offers
eBay£5.79Visit shop 15mm x 1/2"" BSP Male Flat Faced Isolation Valve For Flexible Tap Connector Tails
Visit shop
The Range£6.45Visit shop Primaflow Iso Valve 15Mm X 1/2 Flat Faced Cp - Essential For Plumbing - Gold
Visit shop7 offers from £5.79 - £7.50
View price history by clicking the chart icon.
The Primaflow Iso Valve is designed for homeowners and professionals needing a reliable way to control water flow in residential and commercial plumbing. Its key benefit is providing quick, secure isolation for maintenance or repairs, saving time and preventing water damage. A potential caveat is that it requires proper installation to ensure a leak-free seal. This valve offers durable brass construction, easy push-fit installation, and a compact design for tight spaces.
| Model Part Number | BLF1512 |
|---|---|
| Brand | Primaflow |
The primary function is to provide a quick and reliable way to isolate (shut off) water flow in a plumbing line for maintenance, repair, or emergency purposes.
This specific model connects to a 15mm pipe on one end and a 1/2 inch threaded connection on the other.
Yes, the Primaflow Iso Valve is designed for use with both hot and cold water systems within typical residential and commercial pressure and temperature ranges.
The valve should be firmly seated on the pipe. A secure connection is achieved when the pipe is pushed in fully until it stops. A slight tug should confirm it's locked in place. Always test for leaks after installation by slowly turning the water supply back on.
The valve is constructed from durable brass, ensuring long-term reliability and resistance to corrosion.
Yes, it is suitable for both residential and commercial plumbing systems due to its durable construction and reliable performance.
Minimal maintenance is required. Periodically check for leaks and operate the handle fully on/off to keep the mechanism free. Clean the exterior with a damp cloth.
Ensure both pipe ends are fully and evenly inserted into the push-fit connections. Check for debris on the pipe ends or inside the fitting. Verify that the valve is seated correctly on the pipe.
Ensure the pipe is cut square and deburred. Lightly chamfer the edge of the pipe. Avoid forcing the pipe; if resistance is high, re-check the pipe condition and fitting.
Operate the valve several times to help loosen it. Ensure there are no obstructions around the valve. If stiffness persists, it might indicate internal debris; consider replacement if normal operation cannot be restored.
Setup:
Compatibility:
Care:
