Allstar Performance Steering Column Brackets - 10'' Length

These brackets are designed to provide additional bracing for steering columns or roll cages in competition vehicles, significantly reducing flex and increasing structural rigidity.

No, these are weld-on brackets and are not adjustable after installation. They require permanent welding for secure mounting.

Installation requires welding expertise and equipment. The brackets are notched for easier fitting, but professional welding is essential for safety and effectiveness.

These brackets are primarily intended for competition vehicles where extreme stresses are common. While they can technically be installed on a street car, they are often overkill and require significant modification.

The weld-on brackets are available in four lengths: 2 1/2", 4", 8", and 10".

All available lengths of the Allstar Performance Steering Column Brackets have a width of 3-3/16" (81mm).

No, these are weld-on components and do not include mounting hardware. The bracket itself is welded directly to the vehicle's structure.

The bracket is 3-3/16" (81mm) wide. Ensure your mounting surfaces can accommodate this width. Custom fabrication or modification may be necessary for unique setups.

This indicates an issue with the welding process. Ensure a certified professional performs the welding and that proper welding techniques and materials are used for the specific metal types involved.

Verify that the bracket is correctly positioned and fully welded to both the steering column support and the roll cage/chassis. Ensure the length of the bracket is appropriate for the forces it needs to counteract. Consider adding additional bracing if necessary.