Best current price£40.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£40.95Visit shop B&Q - Light Hardwood Square Corner Moulding (T) 18mm (W) 18mm (L) 2.4M
Visit shop1 offer from £40.95
View price history by clicking the chart icon.
The Snowdon Timber Square Corner Moulding is designed for DIY enthusiasts and trade professionals looking to add a clean, architectural finish to wall corners, window frames, and furniture edges. Its standout feature is its sharp, square profile that provides immediate visual refinement and physical protection to exposed corners. While highly versatile, it is important to note that this is a raw timber product, meaning it requires priming, painting, or varnishing to match your specific interior decor.
| Series | Square corner |
|---|---|
| Brand | Snowdon Timber |
As a timber product, it is not naturally moisture resistant. It should be fully primed and painted if used in environments with humidity.
This product is designed for interior use. If used outdoors, it must be treated with an appropriate exterior-grade wood preservative and heavy-duty outdoor paint.
The cleanest way is a scarf joint (an angled cut) to blend the two pieces seamlessly, rather than a butt joint.
For a clean look, use a combination of construction adhesive and headless pins (brads) to hold it in place while the adhesive cures.
No, this is a rigid timber moulding and will not conform to curved surfaces.
Pre-drill small pilot holes before driving nails to prevent the timber from splitting.
Ensure the wall corner is plumb. If the wall is slightly bowed, use a flexible, paintable caulk to fill the gap after installation.
Use a finer tooth saw blade and sand the cut edge with 180-grit sandpaper for a smooth finish.
To install, ensure your surface is clean and dry. Measure the corner length and cut the moulding using a fine-tooth saw or miter saw for perfect 45-degree angle joints. Attach the moulding using a wood-compatible construction adhesive or small finishing nails, ensuring the nails are countersunk. Fill any nail holes with a paintable wood filler before sanding smooth. To care for your moulding, avoid harsh chemical cleaners. If the wood is installed in a high-traffic area, ensure it is sealed with a high-quality wood finish to prevent dirt buildup and allow for easy wipe-down cleaning.
