Best current price£3.30from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£3.30Visit shop Adsl 2+ High Speed Broadband Modem Cable Rj11 To Rj11 4M White 5055383493593
Visit shop
B&Q£5.58Visit shop B&Q - Adsl 2+ High Speed Broadband Modem Cable Rj11 To Rj11 4M White
Visit shop3 offers from £3.30 - £5.58
View price history by clicking the chart icon.
The Kenable ADSL 2+ High Speed Broadband Modem Cable is an ideal solution for users looking to maximize their internet performance, specifically designed for those with broadband connections of 2Mb/s or higher or ADSL2+ services. By replacing standard, lower-quality telephone cables, this 4-meter RJ11 cable ensures data transmission speeds up to 100Mbits per second with minimized errors; however, users should note that this cable is strictly for modem-to-wall-socket connections and will not improve performance if the underlying internet service provider speed is capped.
| Model Part Number | 009359 |
|---|---|
| Brand | kenable |
This cable ensures your hardware is not the limiting factor. It will not exceed the maximum speed provided by your ISP, but it can stabilize high-speed connections by reducing transmission errors.
This is an RJ11 ADSL cable designed for telephone-based broadband. If your fiber connection uses an RJ11 port for the signal input, it will work, but it is not intended for RJ45 Ethernet fiber WAN ports.
Snagless refers to the moulded cover over the locking tab on the connector, which prevents the tab from getting caught on other cables or surfaces during installation.
While it uses the same RJ11 standard, it is specifically optimized for high-speed data. It will work for a telephone, but it is engineered for modem data performance.
The cable uses standard RJ11 connectors, which are the industry standard for ADSL/broadband modem-to-wall-socket connections.
Ensure both ends of the RJ11 cable are fully seated in the ports until they click; restart the router after verifying the connection.
Inspect the cable for any physical kinks or damage; ensure the cable is not running parallel to power lines which may cause interference.
Setting up the cable is straightforward: unplug your old RJ11 cable from both your wall socket and your modem, then replace it with the Kenable cable. Ensure that both connectors click firmly into place. This cable is designed for permanent indoor installation. To care for your cable, avoid sharp bends or kinking, which can damage the internal copper wiring. If the cable becomes dusty, wipe it gently with a dry, lint-free cloth. Do not use liquids or chemical cleaners, as these can compromise the plastic connectors.
